Deutz-Fahr AgroPrima 6.16

The Deutz-Fahr AgroPrima 6.16 is a tractor produced by Deutz Fahr. It is equipped with a 373.93 ci 6.1 L engine. The listed engine power is Diesel (listed): 110 hp / 82.0 kW. Transmission: 18 forward and 6 reverse. Operating weight: 9812 lbs 4450 kg.

Engine Power

Diesel (listed): 110 hp / 82.0 kW

Fuel & Capacities

34.3 gal 129.8 L

Transmission

18 forward and 6 reverse

Operating Weight

9812 lbs 4450 kg

Overview

	1991 - 1995

Production
Manufacturer	Deutz-Fahr

Deutz-Fahr 6.16 Engine
Deutz 6.1L 6-cyl diesel
Fuel tank	34.3 gal 129.8 L
Engine details ...

Deutz-Fahr 6.16 Transmission
18-speed
Transmission details ...

Deutz-Fahr 6.16 Power
Engine	110 hp 82.0 kW

Mechanical
Four-wheel drive

Hydraulics
Pump flow	12.4 gpm 46.9 lpm

Tractor hitch
Rear lift	11466 lbs 5200 kg

Power Take-off (PTO)
Rear PTO Type	540, 1000

Dimensions & Tires
Wheelbase	106.69 inches 270 cm
Weight	9812 lbs 4450 kg
Front tire	14.9R24
Rear tire	18.4R38
Full dimensions and tires ...

Engine

Engine Detail — 373.93 ci / 6.1 L Diesel

Manufacturer	Deutz
Fuel Type	Diesel
Configuration	6-cylinder
Displacement	373.93 ci 6.1 L
Bore/Stroke	4.016x4.92 inches 102 x 125 mm
Power	110 hp 82.0 kW
Rated RPM	2400

Transmission

Transmission — 18 forward and 6 reverse

Gears

18 forward and 6 reverse

Dimensions

Deutz-Fahr 6.16 Tires
Ag front	14.9R24
Ag rear	18.4R38

Dimensions
Wheelbase	106.69 inches 270 cm
Length	178.35 inches 453 cm
Height	106.69 inches 270 cm
Weight	9812 lbs 4450 kg

Photos

Deutz-Fahr AgroPrima 6.16 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr AgroPrima 6.16 based on its 110 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr AgroPrima 6.16.

Estimated Continuous Field Runtime: 6 hrs

Approximately 6 hours of continuous field operation at ~75% rated power on a full tank (34.3 gal / 129.8 L).

Estimated 75% Load Fuel Burn~5.7 gal/hr (21.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr AgroPrima 6.16 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr AgroPrima 6.16.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)110 hp

Kilowatts (kW)82 kW

Metric Horsepower (PS / CV)111.5 PS

Direct Competitor Comparison

Compare Deutz-Fahr AgroPrima 6.16 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr