John Deere 5625
The John Deere 5625 is a tractor produced by John Deere. It is equipped with a 276 ci 4.5 L engine. The listed engine power is Diesel (gross): 99 hp / 73.8 kW. Transmission: John Deere PowrReverser Hi/Lo. Operating weight: 6030 to 7385 pounds.
Engine Power
Diesel (gross): 99 hp / 73.8 kW
Fuel & Capacities
25 gal (straddle)
94.6 L
Transmission
John Deere PowrReverser Hi/Lo
Operating Weight
6030 to 7385 pounds
Overview
 | 2007 - 2008
5025 SeriesUtility tractor
5025 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Utility tractor | |
Built in Augusta, Georgia, USA | |
John Deere 5625 Engine | |
|---|---|
John Deere 4.5L 4-cyl diesel | |
Engine details ...  |
John Deere 5625 Power | |
|---|---|
Engine (gross) | 99 hp
73.8 kW |
PTO (claimed) | 82 hp
61.1 kW |
PTO (tested) | 87.44 hp
65.2 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | inboard planetary |
Differential lock | mechanical rear |
Power steering | |
Differential hydraulic wet disc brakes | |
Open operator station with two-post folding ROPS. Optional isolated flat-platform (IOOS). Cab available with air-conditioning. | |
Capacity | |
|---|---|
Fuel | 25 gal (straddle)
94.6 L |
33.5 gal (IOOS/cab)
126.8 L | |
Hydraulic system | 10.3 gal (9-speed)
39.0 L |
11.5 gal (12-speed)
43.5 L | |
12 gal (24-speed)
45.4 L | |
Front hubs | 0.74 qts*Each
0.7 L |
Front diff. | 4.8 qts
4.5 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 10.3 gal (9-speed)
39.0 L |
11.5 gal (12-speed)
43.5 L | |
12 gal (24-speed)
45.4 L | |
Pressure | 2828 psi
195.0 bar |
Rear valves | 1 to 3 |
Mid valves | 0, 2 or 3 |
Pump flow | 18.4 gpm
69.6 lpm |
Total flow | 25 gpm
94.6 lpm |
Steering flow | 6.6 gpm
25.0 lpm |
Steering press. | 1957 psi
134.9 bar |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Control | top-link draft sensing |
Rear lift (at 24"/610mm) | 3374 lbs
1530 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | dry disc |
electro-hydraulic wet disc (24-speed) | |
Rear PTO Type | 540 |
540/540E OptOptional | |
540/1000 *Optional field conversion kit. | |
Engine RPM | 540@2400 |
540E@1700 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 85.7 inches
217 cm |
Weight | 6030 to 7385 pounds |
Front tire | 11.2-24 |
Rear tire | 420/90R30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
ROPS Charging amps | 70 |
Cab Charging amps | 90 |
120 OptOptional | |
Battery CCA | 750 |
Battery volts | 12 |
Battery Group | BCI 31 |
References | |
|---|---|
 | |
5025 Series Tractors published in 2007, by John Deere | |
Operator's Guide 5225, 5325, 5425 and 5625 Tractors (OMRE260579) published in 2007 |
Engine
Engine Detail — 276 ci / 4.5 L Diesel
Manufacturer | John Deere PowerTech 4045 |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 276 ci
4.5 L |
Bore/Stroke | 4.19x5.00 inches
106 x 127 mm |
Emissions | Tier II |
Power (gross) | 99 hp
73.8 kW |
Air cleaner | paper and felt elements |
Rated RPM | 2400 |
Idle RPM | 825-2625 |
Operating RPM | 1600-2400 |
Firing order | 1-3-4-2 |
Starter volts | 12 |
Coolant capacity | 12 qts
11.4 L |
Oil capacity | 9 qts
8.5 L |
Transmission
Transmission options | |
|---|---|
9-speed partially synchronized | |
12-speed power shuttle | |
24-speed two-speed power shift |
Transmission — John Deere SyncShuttle
Transmission | John Deere SyncShuttle | ||||
Type | partially synchronized | ||||
Gears | 9 forward and 3 reverse | ||||
Clutch | dry disc | ||||
Oil capacity | 41.2 qts
39.0 L | ||||
Oil type | 122o↔-10oF [50o↔-23oC] : Hy-Gard 86o↔-40oF [30o↔-40oC] : Low-Viscosity Hy-Gard | 122o↔-10oF [50o↔-23oC] | : Hy-Gard | 86o↔-40oF [30o↔-40oC] | : Low-Viscosity Hy-Gard |
122o↔-10oF [50o↔-23oC] | : Hy-Gard | ||||
86o↔-40oF [30o↔-40oC] | : Low-Viscosity Hy-Gard | ||||
Three gears (1-3) plus reverse in three ranges (A-C). Gears may be shifted on the move using the clutch. Tractor must be stopped, and clutch used, to shift ranges. | |||||
With 16.9-30 rear tires. | |||||
 | |||||
122o↔-10oF [50o↔-23oC] | : Hy-Gard |
|---|---|
86o↔-40oF [30o↔-40oC] | : Low-Viscosity Hy-Gard |
Transmission — John Deere PowrReverser
Transmission | John Deere PowrReverser | ||||
Type | power shuttle | ||||
Gears | 12 forward and reverse | ||||
Clutch | wet disc | ||||
Oil capacity | 46 qts
43.5 L | ||||
Oil type | 122o↔-10oF [50o↔-23oC] : Hy-Gard 86o↔-40oF [30o↔-40oC] : Low-Viscosity Hy-Gard | 122o↔-10oF [50o↔-23oC] | : Hy-Gard | 86o↔-40oF [30o↔-40oC] | : Low-Viscosity Hy-Gard |
122o↔-10oF [50o↔-23oC] | : Hy-Gard | ||||
86o↔-40oF [30o↔-40oC] | : Low-Viscosity Hy-Gard | ||||
Four gears (1-4) in three ranges (A-C) with reverser lever. Direction may be changed without using the clutch. Gear shifts are synchronized using the clutch. Tractor must be stopped to shift ranges. | |||||
With 16.9-30 rear tires. | |||||
 | |||||
122o↔-10oF [50o↔-23oC] | : Hy-Gard |
|---|---|
86o↔-40oF [30o↔-40oC] | : Low-Viscosity Hy-Gard |
Transmission — John Deere PowrReverser Hi/Lo
Transmission | John Deere PowrReverser Hi/Lo |
Type | two-speed power shift |
Gears | 24 forward and reverse |
Clutch | wet disc |
Oil capacity | 48 qts
45.4 L |
Adds a push-button high-low power shift to the PowrReverser transmission. Gear shifts are synchronized using the clutch. Tractor must be stopped to shift ranges. | |
With 16.90-30 rear tires. Reverse speeds are 10% faster than forward speeds. | |
 | |
Dimensions
John Deere 5625 Tires | |
|---|---|
Standard tires (ag) | Front: 11.2-24. Rear: 420/90R30 |
Dimensions | |
|---|---|
Wheelbase | 85.7 inches
217 cm |
Length | 151.5 inches
384 cm |
Clearance (front axle) | 17.7 inches
44 cm |
Clearance (drawbar) | 17.8 inches
45 cm |
Flange rear axle | 57.3 inch length
1455 mm |
John Deere 5625 Weight | |
|---|---|
Shipping | 6250 lbs (straddle)
2835 kg |
6470 lbs (IOOS)
2934 kg | |
7385 lbs (cab)
3349 kg | |
4WD ROPS Operating | 6030 lbs
2735 kg |
Max Drawbar | 1675 lbs (extended)
759 kg |
2470 lbs (retracted)
1120 kg | |
John Deere 5625 Height | |
|---|---|
Steering wheel | 65.6 inches (straddle)
166 cm |
72.1 inches (IOOS)
183 cm | |
Hood | 55.5 inches
140 cm |
ROPS | 96.8 inches (straddle)
245 cm |
104.6 inches (IOOS)
265 cm | |
Height (Folded ROPS) | 78.5 inches (straddle)
199 cm |
85.6 inches (IOOS)
217 cm | |
Cab | 99.4 inches
252 cm |
Exhaust | 91.7 inches (straddle)
232 cm |
90.5 inches (IOOS)
229 cm | |
Tests
Nebraska Tractor Test 1906 | |
|---|---|
Diesel 9/3 4WD
September 7 - 11, 2007
Link: Nebraska Tractor Test 1906 file | |
PTO performance | |
Max power | 87.44 hp
65.2 kW |
Fuel use | 5.5 gal/hour
20.8 l/hour |
Power at rated engine speed | 82.81 hp
61.8 kW |
Fuel use | 5.6 gal/hour
21.2 l/hour |
Attachments
Attachment overview | |
|---|---|
John Deere 542 loader | |
John Deere 542SL loader |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 5625 based on its 99 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 5625.
Estimated Continuous Field Runtime: 4.9 hrs
Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (25 gal / 94.6 L).
Estimated 75% Load Fuel Burn~5.1 gal/hr (19.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 5625 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 5625.
Converted Equivalents:
Horsepower (HP)99 hp
Kilowatts (kW)73.8 kW
Metric Horsepower (PS / CV)100.4 PS
Direct Competitor Comparison
Compare John Deere 5625 against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 5625
Engine Power:Diesel (gross): 99 hp / 73.8 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 786
Engine Power:89.1
Production Years:1980 - 1981
Related models
John Deere 5080G
- Power:
- 80
- Production years:
- 2009 - 2013
John Deere 5080M
- Power:
- 80
- Production years:
- 2009 - 2013
John Deere 5080R
- Power:
- 80
- Production years:
- 2009 - 2016
John Deere 5500
- Power:
- 80
- Production years:
- 1996 - 2000
John Deere 5510
- Power:
- 80
- Production years:
- 2000 - 2002