Deutz-Fahr DX 8.30
The Deutz-Fahr DX 8.30 is a tractor produced by Deutz Fahr. It is equipped with a 584.1 ci 9.6 L engine. The listed engine power is Diesel (listed): 220 hp / 164.1 kW. Transmission: ZF Powermatic-S. Operating weight: 20392 lbs 9249 kg.
Engine Power
Diesel (listed): 220 hp / 164.1 kW
Fuel & Capacities
79.3 gal
300.2 L
Transmission
ZF Powermatic-S
Operating Weight
20392 lbs
9249 kg
Overview
 | 1983 - 1988
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Row-Crop tractor | |
Deutz-Fahr DX 8.30 Engine | |
|---|---|
Deutz 9.6L 6-cyl diesel | |
Fuel tank | 79.3 gal
300.2 L |
105.7 galOptOptional
400.1 L | |
Engine details ...  | |
Deutz-Fahr DX 8.30 Transmission | |
|---|---|
18-speed three-speed power shift | |
Transmission details ...  |
Deutz-Fahr DX 8.30 Power | |
|---|---|
Engine | 220 hp
164.1 kW |
PTO (claimed) | 190 hp
141.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard. |
Hydraulics | |
|---|---|
Pressure | 2538 psi
175.0 bar |
Pump flow | 21.4 gpm
81.0 lpm |
Steering flow | 12.2 gpm
46.2 lpm |
Steering press. | 2176 psi
150.0 bar |
Tractor hitch | |
|---|---|
Rear lift | 17984 lbs
8157 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 118.1 inches
299 cm |
Weight | 20392 lbs
9249 kg |
Front tire | 15-30 |
Rear tire | 18-38 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
DX8 published in 1986, by Deutz-Fahr |
Engine
Engine Detail — 584.1 ci / 9.6 L Diesel
Manufacturer | Deutz BF6L413FR |
Configuration | turbocharged diesel, 6-cylinder, air-cooled |
Displacement | 584.1 ci
9.6 L |
Bore/Stroke | 4.92x5.12 inches
125 x 130 mm |
Power | 220 hp
164.1 kW |
Rated RPM | 2200 |
Starter type | electric |
Transmission
Transmission — ZF Powermatic-S
Transmission | ZF Powermatic-S |
Type | three-speed power shift |
Gears | 18 forward and 6 reverse |
ZF T-6636 transmission. Three forward power shift groups in six synchronized ranges. | |
With 18-38 rear tires. | |
 | |
Dimensions
Deutz-Fahr DX 8.30 Tires | |
|---|---|
Standard tires (ag) | Front: 15-30. Rear: 18-38 |
Dimensions | |
|---|---|
Wheelbase | 118.1 inches
299 cm |
Length | 213.8 inches
543 cm |
Width | 98.4 inches
249 cm |
Height (cab) | 122.1 inches
310 cm |
Operating weight | 20392 lbs
9249 kg |
Max weight | 26455 lbs
11999 kg |
Ground clearance | 20.7 inches
52 cm |
Front tread | 76.8 to 89 inches
195 to 226 cm |
Rear tread | 72.8 to 86.6 inches
184 to 219 cm |
Photos
Deutz-Fahr DX 8.30
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr DX 8.30 based on its 220 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁 | Commercial / Field Scale | High horsepower articulated/4WD field plowing. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙 | Commercial / Field Scale | Broad-acre grain tillage for high-drawbar tractors. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr DX 8.30.
Estimated Continuous Field Runtime: 6.9 hrs
Approximately 6.9 hours of continuous field operation at ~75% rated power on a full tank (79.3 gal / 300.2 L).
Estimated 75% Load Fuel Burn~11.4 gal/hr (43.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr DX 8.30 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr DX 8.30.
Converted Equivalents:
Horsepower (HP)220 hp
Kilowatts (kW)164.1 kW
Metric Horsepower (PS / CV)223.1 PS
Direct Competitor Comparison
Compare Deutz-Fahr DX 8.30 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr DX 8.30
Engine Power:Diesel (listed): 220 hp / 164.1 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 6788
Engine Power:200
Production Years:1981 - 1984
Related models
Deutz-Fahr Agrotron 165.7
- Power:
- 177
- Production years:
- 2005 - 2007
Deutz-Fahr Agrotron 180.7
- Power:
- 179.7
- Production years:
- 2005 - 2007
Deutz-Fahr M650
- Power:
- 181
- Production years:
- 2007 - 2009
Deutz-Fahr 6.81
- Power:
- 185
- Production years:
- 1992 - 1997
Deutz-Fahr 7210 TTV
- Power:
- 186
- Production years:
- 2012 - 2022