Deutz-Fahr M650
The Deutz-Fahr M650 is a tractor produced by Deutz Fahr. It is equipped with a 369.6 ci 6.1 L engine. The listed engine power is Diesel (listed): 181 hp / 135.0 kW. Transmission: ZF 7200. Operating weight: 14880 lbs 6749 kg.
Engine Power
Diesel (listed): 181 hp / 135.0 kW
Fuel & Capacities
80.6 gal
305.1 L
Transmission
ZF 7200
Operating Weight
14880 lbs
6749 kg
Overview
 | 2007 - 2009
Agrotron M Series |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Deutz-Fahr M650 Engine | |
|---|---|
Deutz 6.1L 6-cyl diesel | |
Engine details ...  |
Deutz-Fahr M650 Power | |
|---|---|
Engine | 181 hp
135.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Cab standard with air-conditioning. |
Capacity | |
|---|---|
Fuel | 80.6 gal
305.1 L |
Hydraulic system | 10.6 gal
40.1 L |
Hydraulics | |
|---|---|
Type | load sensing |
Capacity | 10.6 gal
40.1 L |
Pressure | 2900 psi
200.0 bar |
Rear valves | 4 |
Pump flow | 31.7 gpm
120.0 lpm |
Steering flow | 11 gpm
41.6 lpm |
Steering press. | 2600 psi
179.3 bar |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Control | position and draft control |
Rear lift | 20240 lbs
9180 kg |
Front Hitch | II |
Front lift | 9900 lbs
4490 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Engine RPM | 540@1995 |
540E@1610 | |
1000@1995 | |
1000E@1610 | |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Engine RPM | 1000@1960 |
Dimensions & Tires | |
|---|---|
Wheelbase | 111 inches
281 cm |
Weight | 14880 lbs
6749 kg |
Front tire | 540/65R34 |
Rear tire | 650/65R42 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 200 |
Battery volts | 12 |
Battery AH | 190 |
Engine
Engine Detail — 369.6 ci / 6.1 L Diesel
Manufacturer | Deutz |
Configuration | turbocharged intercooled diesel, 6-cylinder 24-valve, liquid-cooled |
Displacement | 369.6 ci
6.1 L |
Bore/Stroke | 3.98x4.96 inches
101 x 126 mm |
Power | 181 hp
135.0 kW |
Maximum Power | 192 hp
143.2 kW |
Rated RPM | 2100 |
Torque | 522.4 lb-ft
708.4 Nm |
Torque RPM | 1100 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
24-speed partial power shift | |
40-speed creeper |
Transmission — ZF 7200
Transmission | ZF 7200 |
Type | partial power shift |
Gears | 24 forward and reverse |
Clutch | wet disc |
Four power shift gears in six synchronized ranges with power shuttle. | |
Transmission — 40 forward and reverse creeper
Manufacturer | ZF |
Type | creeper |
Gears | 40 forward and reverse |
Clutch | wet disc |
Optional creeper provides an additional four ranges (with four speeds each) to the main transmission. | |
Dimensions
Deutz-Fahr M650 Tires | |
|---|---|
Standard tires (ag) | Front: 540/65R34. Rear: 650/65R42 |
Dimensions | |
|---|---|
Wheelbase | 111 inches
281 cm |
Length | 189.4 inches
481 cm |
Height (cab) | 122.8 inches
311 cm |
Weight | 14880 lbs
6749 kg |
Photos
Deutz-Fahr M650 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr M650 based on its 181 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr M650.
Estimated Continuous Field Runtime: 8.6 hrs
Approximately 8.6 hours of continuous field operation at ~75% rated power on a full tank (80.6 gal / 305.1 L).
Estimated 75% Load Fuel Burn~9.4 gal/hr (35.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr M650 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr M650.
Converted Equivalents:
Horsepower (HP)181 hp
Kilowatts (kW)135 kW
Metric Horsepower (PS / CV)183.5 PS
Direct Competitor Comparison
Compare Deutz-Fahr M650 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr M650
Engine Power:Diesel (listed): 181 hp / 135.0 kW
★ Baseline Reference
Related models
Deutz-Fahr 6.45
- Power:
- 145
- Production years:
- 1995 - 1997
Deutz-Fahr DX 140
- Power:
- 145.6
- Production years:
- 1978 - 1983
Deutz-Fahr Agrotron 150 MK3
- Power:
- 150
- Production years:
- 2001 - 2003
Deutz-Fahr DX 160
- Power:
- 150
- Production years:
- 1978 - 1983
Deutz-Fahr Intrac 6.60
- Power:
- 150
- Production years:
- 1987 - 1990