Deutz-Fahr Intrac 2006

The Deutz-Fahr Intrac 2006 is a tractor produced by Deutz Fahr. It is equipped with a 373.93 ci 6.1 L engine. The listed engine power is Diesel (listed): 116 hp / 86.5 kW. Transmission: infinite forward and reverse (2-range). Drive type: 4x4 4WD. Operating weight: 10914 lbs 4950 kg.

Engine Power

Diesel (listed): 116 hp / 86.5 kW

Drive & Traction

4x4 4WD

Fuel & Capacities

Diesel

Transmission

infinite forward and reverse (2-range)

Operating Weight

10914 lbs 4950 kg

Overview

	1975 Intrac 2000 SeriesTool Carrier tractor Intrac 2000 Series Tool Carrier tractor

Production
Manufacturer	Deutz-Fahr
Tool Carrier tractor

Deutz-Fahr Intrac 2006 Engine
Deutz 6.1L 6-cyl diesel
Engine details ...

Deutz-Fahr Intrac 2006 Transmission
hydrostatic
Transmission details ...

Deutz-Fahr Intrac 2006 Power
Engine	116 hp 86.5 kW

Mechanical
Drive	4x4 4WD
Power steering
Drum brakes
Cab standard.

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	88.6 inches 225 cm
Weight	10914 lbs 4950 kg
Front tire	14.5-24
Rear tire	14.5-24
Full dimensions and tires ...

Engine

Engine Detail — 373.93 ci / 6.1 L Diesel

Manufacturer	Deutz F6L913
Fuel Type	Diesel
Configuration	6-cylinder, air-cooled
Displacement	373.93 ci 6.1 L
Bore/Stroke	4.016x4.92 inches 102 x 125 mm
Power	116 hp 86.5 kW
Rated RPM	2500

Transmission

Transmission — infinite forward and reverse (2-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (2-range)

Dimensions

Deutz-Fahr Intrac 2006 Tires
Ag front	14.5-24
Ag rear	14.5-24

Dimensions
Wheelbase	88.6 inches 225 cm
Length	192.91 inches 489 cm
Height	104.33 inches 264 cm
Weight	10914 lbs 4950 kg

Photos

Deutz-Fahr Intrac 2006 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr Intrac 2006 based on its 116 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr Intrac 2006.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr Intrac 2006 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr Intrac 2006.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)116 hp

Kilowatts (kW)86.5 kW

Metric Horsepower (PS / CV)117.6 PS

Direct Competitor Comparison

Compare Deutz-Fahr Intrac 2006 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr