Erkunt Nimet 75
The Erkunt Nimet 75 is a tractor produced by Erkunt. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 74.4 hp / 55.5 kW. Transmission: 16 forward and reverse. Operating weight: 8157 to 8818 pounds.
Engine Power
Diesel (listed): 74.4 hp / 55.5 kW
Fuel & Capacities
29.1 gal
110.1 L
Transmission
16 forward and reverse
Operating Weight
8157 to 8818 pounds
Overview
 | 2010 -
Utility tractor |
|---|---|
2010 - | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | Erkunt |
Utility tractor | |
Built in Ankara, Turkey | |
Erkunt Nimet 75 Engine | |
|---|---|
Perkins 4.4L 4-cyl diesel | |
Fuel tank | 29.1 gal
110.1 L |
Engine details ...  | |
Erkunt Nimet 75 Transmission | |
|---|---|
16-speed power shuttle | |
Transmission details ...  |
Erkunt Nimet 75 Power | |
|---|---|
Engine | 74.4 hp
55.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
ROPS. Cab available with air-conditioning. |
Hydraulics | |
|---|---|
Pressure | 2756 psi
190.0 bar |
Valves | 4 |
Pump flow | 12.8 gpm
48.4 lpm |
Tractor hitch | |
|---|---|
Rear lift | 8598 lbs
3900 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 430/540/540E/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 91.7 inches
232 cm |
Weight | 8157 to 8818 pounds |
Front tire | 320/85R24 |
Rear tire | 380/85R38 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
Luxury Series published by Erkunt |
Engine
Engine Detail — 268.5 ci / 4.4 L Diesel
Manufacturer | Perkins 1104D-44T |
Configuration | turbocharged intercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 268.5 ci
4.4 L |
Bore/Stroke | 4.13x5.00 inches
105 x 127 mm |
Emissions | Stage IIIA |
Power | 74.4 hp
55.5 kW |
Rated RPM | 2200 |
Torque | 226.4 lb-ft
307.0 Nm |
Torque RPM | 1400 |
Starter type | electric |
Transmission
Transmission — 16 forward and reverse power shuttle
Type | power shuttle |
Gears | 16 forward and reverse |
Dimensions
Erkunt Nimet 75 Tires | |
|---|---|
Standard tires (ag) | Front: 320/85R24. Rear: 380/85R38 |
Front: 280/85R24. Rear: 460/85R30 | |
Dimensions | |
|---|---|
Wheelbase | 91.7 inches
232 cm |
Length | 165.8 inches
421 cm |
Width | 76.2 inches
193 cm |
Height (ROPS) | 105.3 inches
267 cm |
Height (cab) | 104.3 inches
264 cm |
ROPS Weight | 8157 lbs
3700 kg |
Cab Weight | 8818 lbs
3999 kg |
Rear tread | 59.1 to 74.8 inches
150 to 189 cm |
Photos
Erkunt Nimet 75 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Erkunt Nimet 75 based on its 74.4 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Erkunt Nimet 75.
Estimated Continuous Field Runtime: 7.5 hrs
Approximately 7.5 hours of continuous field operation at ~75% rated power on a full tank (29.1 gal / 110.2 L).
Estimated 75% Load Fuel Burn~3.9 gal/hr (14.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Erkunt Nimet 75 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Erkunt Nimet 75.
Converted Equivalents:
Horsepower (HP)74.4 hp
Kilowatts (kW)55.5 kW
Metric Horsepower (PS / CV)75.4 PS
Direct Competitor Comparison
Compare Erkunt Nimet 75 against same-era industry alternatives in the same horsepower class.
Current Model
Erkunt
Erkunt Nimet 75
Engine Power:Diesel (listed): 74.4 hp / 55.5 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 574
Engine Power:67
Production Years:1970 - 1978
Related models
Erkunt Bereket 65
- Power:
- 63
- Production years:
- 2010 - 2020
Erkunt Bereket 65E
- Power:
- 63
- Production years:
- 2010 - 2020
Erkunt Bereket 65M
- Power:
- 63
- Production years:
- 2010 - 2020
Erkunt Nimet 2x4
- Power:
- 64.4
Erkunt Nimet 4x4
- Power:
- 64.4