TractorData Logo
TractorData

John Deere 1650

The John Deere 1650 is a tractor produced by John Deere. It is equipped with a 190 ci 3.1 L engine. The listed engine power is Diesel (gross): 67 hp / 50.0 kW. Transmission: 9 forward and 3 reverse. Operating weight: 4630 to 5350 pounds.

Engine Power
Diesel (gross): 67 hp / 50.0 kW
Fuel & Capacities
21.1 gal 79.9 L
Transmission
9 forward and 3 reverse
Operating Weight
4630 to 5350 pounds

Overview

John Deere 1650 tractor photo
1984 - 1988 Utility tractorYanmar built Utility tractor Yanmar built
Production
Distributor
John Deere
Manufacturer
Yanmar
Utility tractor
Built in Japan
Original price
$18,457 (1983 2WD )
$22,809 (1983 4WD )
When tested at Nebraska, the John Deere 1650 set a new fuel economy record, breaking a nearly 30-year record previously held by the John Deere 720.
John Deere 1650 Engine
Yanmar 3.1L 4-cyl diesel
Fuel tank
21.1 gal 79.9 L
Engine details ...
John Deere 1650 Transmission
9-speed gear
Transmission details ...
John Deere 1650 Power
Engine (gross)
67 hp 50.0 kW
PTO (claimed)
60 hp 44.7 kW
Drawbar (tested)
51.13 hp 38.1 kW
PTO (tested)
62.22 hp 46.4 kW
Performance test details ...
Mechanical
Two- or four-wheel drive
Final drives
planetary
Differential lock
mechanical
Steering
power assist
Differential hydraulic wet disc brakes
ROPS.
Hydraulics
Type
open center
Pressure
2250 psi 155.1 bar
Valves
0 to 2
Pump flow
10.2 gpm 38.6 lpm
Tractor hitch
Rear Type
II/I
Control
center link sensing with position and draft control
Rear lift (at 24"/610mm)
2,698 lbs 1223 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540 (1.375)
Engine RPM
540@2250
Dimensions & Tires
2WD Wheelbase
82.8 inches 210 cm
4WD Wheelbase
83 inches 210 cm
Weight
4630 to 5350 pounds
Front tire
6.50-16
2WD Rear tire
16.9-28
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
25
Battery CCA
485
Battery volts
12
References
1650 references literature
Consumer Products Price List published in 1983, by John Deere
Grounds Care Equipment Purchasing Guide published in 1983, by John Deere
Loaders, Spreaders and Blades published in 1984, by John Deere
Operator's Manual 1250, 1450 and 1650 Tractors (OMRW18976) published in 1986
Compact Utility/Utility Tractors Product Information Handbook published in 1983, by John Deere
Utility Tractors Product Information Handbook published in 1984, by John Deere
Tractors 40 to 85 HP published in 1986, by John Deere
Tractors 40 to 95 HP published in 1988, by John Deere
40 to 100 HP Tractors Product Information Handbook published in 1987, by John Deere
40 to 100 HP Tractors Product Information Handbook published in 1988, by John Deere
Diesel Tractors 14.5 to 60 PTO hp published in 1984, by John Deere
Agricultural Price List published in 1983, by John Deere
Tractors Hi-Crop, Low-Profile, Narrow- and Wide-Tread published in 1985, by John Deere

Engine

Engine Detail — 190 ci / 3.1 L Diesel

Manufacturer
Yanmar
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled inline
Displacement
190 ci 3.1 L
Bore/Stroke
3.74x4.33 inches 95 x 110 mm
Power (gross)
67 hp 50.0 kW
Fuel use
3.338 gal/hour 12.6 l/hour
Fuel system
direct injection
Air cleaner
dual paper elements
Compression
18:1
Rated RPM
2300
Idle RPM
800-2475
Firing order
1-3-4-2
Starter volts
12
Coolant capacity
11.1 qts 10.5 L
Oil capacity
12.7 qts 12.0 L
Oil change
200 h

Transmission

Transmission — 9 forward and 3 reverse gear

Type
gear
Gears
9 forward and 3 reverse
Clutch
dry disc
Three gears (1-3) plus reverse (R) in three ranges (I, II, III). Tractor must be stopped, and clutch used, to shift range or gear.
1650 gear speeds

Dimensions

John Deere 1650 Tires
2WD Standard tires (ag)
Front: 6.50-16. Rear: 16.9-28
4WD Standard tires (ag)
Front: 11.2-24. Rear: 16.9-28
4WD Optional tires (ag)
Front: 12.4-24. Rear: 16.9-30
Lawn/turf front
27x9.50-15
Lawn/turf rear
21.5L-16.1
Dimensions
2WD Wheelbase
82.8 inches 210 cm
4WD Wheelbase
83 inches 210 cm
Length
146.3 inches 371 cm
2WD Width
71.8 inches 182 cm
4WD Width
72.6 inches 184 cm
2WD Front tread
56.7 to 76.4 inches 144 to 194 cm
4WD Front tread
55 to 79.8 inches 139 to 202 cm
Rear tread
54.8 to 82.9 inches 139 to 210 cm
John Deere 1650 Weight
Shipping
4,630 lbs (2WD) 2100 kg
5,290 lbs (4WD) 2399 kg
Operating
5,350 lbs (2WD) 2426 kg
Ballasted
7,785 lbs 3531 kg
John Deere 1650 Height
2WD Hood
58.9 inches 149 cm
4WD Hood
60.2 inches 152 cm
2WD ROPS
88.9 inches 225 cm
4WD ROPS
89 inches 226 cm

Tests

Nebraska Tractor Test 1506
Diesel 9-speed 2WD October 31 - November 11, 1983 Link: Nebraska Tractor Test 1506 file
PTO performance
Power at rated engine speed
62.22 hp 46.4 kW
Fuel use
3.3 gal/hour 12.5 l/hour
Power at rated PTO speed
62.70 hp 46.8 kW
Fuel use
3.3 gal/hour 12.5 l/hour
Drawbar performance
Max power
51.13 hp 38.1 kW
Fuel use
3.2 gal/hour 12.1 l/hour
Max pull
6572 lbs 2981 kg

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 1650 based on its 67 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 1650.

Estimated Continuous Field Runtime: 6.1 hrs

Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (21.1 gal / 79.9 L).

Estimated 75% Load Fuel Burn~3.5 gal/hr (13.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

John Deere 1650 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 1650.

Converted Equivalents:

Horsepower (HP)67 hp
Kilowatts (kW)50 kW
Metric Horsepower (PS / CV)67.9 PS

Direct Competitor Comparison

Compare John Deere 1650 against same-era industry alternatives in the same horsepower class.

Current Model
John Deere

John Deere 1650

Engine Power:Diesel (gross): 67 hp / 50.0 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 2860M

Engine Power:60.3
Production Years:2020 - 2026
View Full Specs→
International HarvesterMarket Competitor

International Harvester 460

Engine Power:61
Production Years:1958 - 1963
View Full Specs→
Deutz-FahrMarket Competitor

Deutz-Fahr DX 3.50

Engine Power:61
Production Years:1984 - 1995
View Full Specs→
KubotaMarket Competitor

Kubota M5950

Engine Power:61
Production Years:1983 - 1993
View Full Specs→

Related models