Erkunt Nimet 75.4E

The Erkunt Nimet 75.4E is a tractor produced by Erkunt. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 74.4 hp / 55.5 kW. Transmission: 24 forward and reverse. Operating weight: 7606 to 8047 pounds.

Engine Power

Diesel (listed): 74.4 hp / 55.5 kW

Fuel & Capacities

29.1 gal 110.1 L

Transmission

24 forward and reverse

Operating Weight

7606 to 8047 pounds

Overview

	2010 - Utility tractor
2010 -
Utility tractor

Production
Manufacturer	Erkunt
Utility tractor
Built in Ankara, Turkey

Erkunt Nimet 75.4E Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	29.1 gal 110.1 L
Engine details ...

Erkunt Nimet 75.4E Power
Engine	74.4 hp 55.5 kW

Mechanical
Four-wheel drive
Two-post folding ROPS. Cab optional.

Hydraulics
Pressure	2756 psi 190.0 bar
Valves	4
Pump flow	12.8 gpm 48.4 lpm

Tractor hitch
Rear lift	5732 lbs 2600 kg
Plus Rear lift	6614 lbs 3000 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E

Dimensions & Tires
Wheelbase	91.6 inches 232 cm
Weight	7606 to 8047 pounds
Front tire	280/85R24
Rear tire	420/85R30
Full dimensions and tires ...

References

E Series published by Erkunt

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44T
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Emissions	Stage IIIA
Power	74.4 hp 55.5 kW
Rated RPM	2200
Torque	226.4 lb-ft 307.0 Nm
Torque RPM	1400
Starter type	electric

Transmission

Transmission options
12-speed sync shuttle
24-speed sync shuttle

Transmission — 12 forward and reverse sync shuttle

Type	sync shuttle
Gears	12 forward and reverse

Transmission — 24 forward and reverse sync shuttle

Type	sync shuttle
Gears	24 forward and reverse

Dimensions

Erkunt Nimet 75.4E Tires
Standard tires (ag)	Front: 280/85R24. Rear: 420/85R30
	Front: 320/85R24. Rear: 340/85R36

Dimensions
Wheelbase	91.6 inches 232 cm
Length	161.9 inches 411 cm
Width	78.4 inches 199 cm
Height (cab)	106.1 inches 269 cm
ROPS Weight	7606 lbs 3450 kg
Cab Weight	8047 lbs 3650 kg

Photos

Erkunt Nimet 75.4E tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Erkunt Nimet 75.4E based on its 74.4 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Erkunt Nimet 75.4E.

Estimated Continuous Field Runtime: 7.5 hrs

Approximately 7.5 hours of continuous field operation at ~75% rated power on a full tank (29.1 gal / 110.2 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours