Fahr D132L

The Fahr D132L is a tractor produced by Fahr. It is equipped with a 79.6 ci 1.3 L engine. The listed engine power is Diesel (listed): 20 hp / 14.9 kW. Transmission: ZF A205. Operating weight: 2950 lbs 1338 kg.

Engine Power
Diesel (listed): 20 hp / 14.9 kW
Fuel & Capacities
Diesel
Transmission
ZF A205
Operating Weight
2950 lbs 1338 kg

Overview

No photo available
1960 - 1961
Production
Manufacturer
Fahr
Total built
410
Fahr D132L Engine
Guldner 1.3L 2-cyl diesel
Engine details ...
Fahr D132L Transmission
8-speed gear
Transmission details ...
Fahr D132L Power
Engine
20 hp 14.9 kW
Mechanical
Two-wheel drive
Manual steering
Open operator station.
Power Take-off (PTO)
Rear PTO Type
540/1000
Dimensions & Tires
Wheelbase
72.8 inches 184 cm
Weight
2950 lbs 1338 kg
Full dimensions and tires ...

Engine

Engine Detail — 79.6 ci / 1.3 L Diesel

Manufacturer
Guldner 2LD
Fuel Type
Diesel
Configuration
2-cylinder, air-cooled
Displacement
79.6 ci 1.3 L
Bore/Stroke
3.35x4.53 inches 85 x 115 mm
Power
20 hp 14.9 kW

Transmission

Transmission — ZF A205

Transmission
ZF A205
Type
gear
Gears
8 forward and 4 reverse

Dimensions

Fahr D132L Tires
Dimensions
Wheelbase
72.8 inches 184 cm
Length
121.3 inches 308 cm
Width
60 inches 152 cm
Height
54.5 inches 138 cm
Weight
2950 lbs 1338 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Fahr D132L based on its 20 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
4 ft (48 in)1.2 mLight DutyPasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep
42 to 48 in105 - 120 cmLight DutyCovers compact tractor tire width.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fahr D132L.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Fahr D132L Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Fahr D132L.

Converted Equivalents:

Horsepower (HP)20 hp
Kilowatts (kW)14.9 kW
Metric Horsepower (PS / CV)20.3 PS

Direct Competitor Comparison

Compare Fahr D132L against same-era industry alternatives in the same horsepower class.

Current Model
Fahr

Fahr D132L

Engine Power:Diesel (listed): 20 hp / 14.9 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1215

Engine Power:18
Production Years:1996 - 2003
International HarvesterMarket Competitor

International Harvester 184 Lo-Boy

Engine Power:18
Production Years:1977 - 1980
CaseIHMarket Competitor

CaseIH 235

Engine Power:18
Production Years:1986 - 1990
KubotaMarket Competitor

Kubota B7410

Engine Power:18
Production Years:2004 - 2007
  • Fahr D130

    Power:
    17
    Production years:
    1954 - 1958
  • Fahr D130A

    Power:
    17
    Production years:
    1957 - 1958
  • Fahr D17

    Power:
    17
    Production years:
    1951 - 1953
  • Fahr D17N

    Power:
    17
    Production years:
    1953 - 1955
  • Fahr D135

    Power:
    18
    Production years:
    1958 - 1959