Fahr D180H
The Fahr D180H is a tractor produced by Fahr. It is equipped with a 110.5 ci 1.8 L engine. The listed engine power is Diesel (listed): 24 hp / 17.9 kW. Transmission: Fahr F9C1. Operating weight: 3150 lbs 1428 kg.
Engine Power
Diesel (listed): 24 hp / 17.9 kW
Fuel & Capacities
Diesel
Transmission
Fahr F9C1
Operating Weight
3150 lbs
1428 kg
Overview
 | 1954 - 1959 |
|---|
Production | |
|---|---|
Manufacturer | Fahr |
Total built | 8020 |
Fahr D180H Engine | |
|---|---|
MWM 1.8L 2-cyl diesel | |
Engine details ...  |
Fahr D180H Transmission | |
|---|---|
5-speed gear | |
Transmission details ...  |
Fahr D180H Power | |
|---|---|
Engine | 24 hp
17.9 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Manual steering | |
Open operator station. |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 71.6 inches
181 cm |
Weight | 3150 lbs
1428 kg |
Front tire | 5.50-16 |
Rear tire | 10-28 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 110.5 ci / 1.8 L Diesel
Manufacturer | MWM AKD112Z |
Fuel Type | Diesel |
Configuration | 2-cylinder, air-cooled |
Displacement | 110.5 ci
1.8 L |
Bore/Stroke | 3.86x4.72 inches
98 x 120 mm |
Power | 24 hp
17.9 kW |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Fahr F9C1
Transmission | Fahr F9C1 |
Type | gear |
Gears | 5 forward and 1 reverse |
Dimensions
Fahr D180H Tires | |
|---|---|
Ag front | 5.50-16 |
Ag rear | 10-28 |
8-32 | |
Dimensions | |
|---|---|
Wheelbase | 71.6 inches
181 cm |
Length | 110.5 inches
280 cm |
Width | 61.5 inches
156 cm |
Height | 71.5 inches
181 cm |
Weight | 3150 lbs
1428 kg |
Photos
Fahr D180H
Recommended Implements & Sizing Guide
Engineering recommendations for Fahr D180H based on its 24 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Fahr D180H.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Fahr D180H Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Fahr D180H.
Converted Equivalents:
Horsepower (HP)24 hp
Kilowatts (kW)17.9 kW
Metric Horsepower (PS / CV)24.3 PS
Direct Competitor Comparison
Compare Fahr D180H against same-era industry alternatives in the same horsepower class.
Current Model
Fahr
Fahr D180H
Engine Power:Diesel (listed): 24 hp / 17.9 kW
★ Baseline Reference
Related models
Fahr D131L
- Power:
- 20
- Production years:
- 1959 - 1960
Fahr D131W
- Power:
- 20
- Production years:
- 1959 - 1960
Fahr D132L
- Power:
- 20
- Production years:
- 1960 - 1961
Fahr D132W
- Power:
- 20
- Production years:
- 1960 - 1961
Fahr D160
- Power:
- 22
- Production years:
- 1954 - 1964