Farmtrac 675
The Farmtrac 675 is a tractor produced by Farmtrac. It is equipped with a 268 ci 4.4 L engine. The listed engine power is Diesel (listed): 72.4 hp / 54.0 kW. Transmission: 12 forward and reverse. Operating weight: 5280 to 6115 pounds.
Engine Power
Diesel (listed): 72.4 hp / 54.0 kW
Fuel & Capacities
Diesel
Transmission
12 forward and reverse
Operating Weight
5280 to 6115 pounds
Overview
 | 2002 - 2008
Utility tractorEscorts built
Utility tractor
Escorts built |
|---|
Production | |
|---|---|
Distributor | Farmtrac |
Manufacturer | Escorts |
Utility tractor | |
Built in Faridabad, India | |
Variants | |
|---|---|
675DTC | 4WD |
Farmtrac 675 Engine | |
|---|---|
Perkins 4.4L 4-cyl diesel | |
Engine details ...  |
Farmtrac 675 Transmission | |
|---|---|
12-speed shuttle | |
Transmission details ...  |
Farmtrac 675 Power | |
|---|---|
Engine | 72.4 hp
54.0 kW |
PTO (tested) | 67.13 hp
50.1 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Differential hydraulic wet disc brakes | |
Two-post ROPS. Canopy optional. |
Hydraulics | |
|---|---|
Type | open center |
Valves | 2 |
Pump flow | 9.8 gpm
37.1 lpm |
Steering flow | 3 gpm
11.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at ends) | 5063 lbs
2296 kg |
Rear lift (at 24"/610mm) | 3978 lbs
1804 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 80.7 inches
204 cm |
Weight | 5280 to 6115 pounds |
Front tire | 7.5-16 |
Rear tire | 16.9-30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging amps | 55 |
Battery CCA | 800 |
Battery volts | 12 |
Engine
Engine Detail — 268 ci / 4.4 L Diesel
Manufacturer | Perkins |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 268 ci
4.4 L |
Bore/Stroke | 4.134x5.00 inches
105 x 127 mm |
Power | 72.4 hp
54.0 kW |
Air cleaner | dual paper elements |
Compression | 19.3:1 |
Rated RPM | 2200 |
Starter volts | 12 |
Transmission
Transmission — 12 forward and reverse shuttle
Type | shuttle |
Gears | 12 forward and reverse |
 | |
Dimensions
Farmtrac 675 Tires | |
|---|---|
Ag front | 7.5-16 |
4WD Ag front | 11.2-24 |
Ag rear | 16.9-30 |
18.4-30 | |
Dimensions | |
|---|---|
Wheelbase | 80.7 inches
204 cm |
Length | 145 inches
368 cm |
Width | 76 inches
193 cm |
Height | 96 inches
243 cm |
Farmtrac 675 Weight | |
|---|---|
2WD Shipping | 5280 lbs
2395 kg |
4WD Shipping | 5875 lbs
2664 kg |
4WD Operating | 6115 lbs
2773 kg |
Tests
Nebraska Tractor Test 1917 | |
|---|---|
Diesel 12-speed 4WD
March 3 - July 9, 2008
Link: Nebraska Tractor Test 1917 file | |
PTO performance | |
Power at rated engine speed | 67.13 hp
50.1 kW |
Fuel use | 4.6 gal/hour
17.4 l/hour |
Power at rated PTO speed | 66.71 hp
49.7 kW |
Fuel use | 4.5 gal/hour
17.0 l/hour |
Photos
Montana-branded Long 675DTC with 5440 front-end loader.
Recommended Implements & Sizing Guide
Engineering recommendations for Farmtrac 675 based on its 72.4 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Farmtrac 675.
Estimated Continuous Field Runtime: 1.2 hrs
Approximately 1.2 hours of continuous field operation at ~75% rated power on a full tank (4.5 gal / 17 L).
Estimated 75% Load Fuel Burn~3.8 gal/hr (14.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Farmtrac 675 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Farmtrac 675.
Converted Equivalents:
Horsepower (HP)72.4 hp
Kilowatts (kW)54 kW
Metric Horsepower (PS / CV)73.4 PS
Direct Competitor Comparison
Compare Farmtrac 675 against same-era industry alternatives in the same horsepower class.
Current Model
Farmtrac
Farmtrac 675
Engine Power:Diesel (listed): 72.4 hp / 54.0 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester Hydro 84
Engine Power:65.2
Production Years:1978 - 1983
Related models
Farmtrac 665
- Power:
- 60
- Production years:
- 2005 - 2008
Farmtrac 70
- Power:
- 60
- Production years:
- 2002 - 2003
Farmtrac 8060
- Power:
- 60
- Production years:
- 2007 - 2017
Farmtrac 680
- Power:
- 68
Farmtrac 80
- Power:
- 72.4
- Production years:
- 2002 - 2003