Fendt Farmer 280P

The Fendt Farmer 280P is a tractor produced by Fendt. It is equipped with a 249.3 ci 4.1 L engine. The listed engine power is Diesel (listed): 79.1 hp / 59.0 kW. Transmission: 21 forward and reverse. Operating weight: 6107 lbs 2770 kg.

Engine Power

Diesel (listed): 79.1 hp / 59.0 kW

Fuel & Capacities

15.85 gal 60.0 L

Transmission

21 forward and reverse

Operating Weight

6107 lbs 2770 kg

Overview

	1987 - 2002 Farmer 200 Series

Production
Manufacturer	Fendt

Fendt Farmer 280P Engine
KHD 4.1L 4-cyl diesel
Fuel tank	15.85 gal 60.0 L
Engine details ...

Fendt Farmer 280P Transmission
21-speed
Transmission details ...

Fendt Farmer 280P Power
Engine	79.1 hp 59.0 kW

Mechanical
Two- or four-wheel drive
Power steering
Hydraulic drum brakes
Two-post mid-mount folding ROPS. Cab available with heat and air-conditioning.

Hydraulics
Pressure	2611 psi 180.0 bar
Total flow	18.2 gpm 68.9 lpm

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/750
	540/750/1000 OptOptional

Dimensions & Tires
Wheelbase	85.8 inches 217 cm
Weight	6107 lbs 2770 kg
Front tire	275/70-18
Rear tire	14.9-28
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	55
Charging volts	14
Battery volts	12
Battery AH	88

References

Innovations for 1988 published by Fendt

Engine

Engine Detail — 249.3 ci / 4.1 L Diesel

Manufacturer	KHD F4L913
Fuel Type	Diesel
Configuration	4-cylinder, air-cooled
Displacement	249.3 ci 4.1 L
Bore/Stroke	4.02x4.92 inches 102 x 125 mm
Power	79.1 hp 59.0 kW
Rated RPM	2400
Torque	200.6 lb-ft 272.0 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Transmission

Transmission — 21 forward and 6 reverse

Gears

21 forward and 6 reverse

Transmission — 21 forward and reverse

Gears

21 forward and reverse

Dimensions

Fendt Farmer 280P Tires
Standard tires (ag)	Front: 275/70-18. Rear: 14.9-28

Dimensions
Wheelbase	85.8 inches 217 cm
Length	144.3 inches 366 cm
Width	65.6 inches 166 cm
Height (ROPS)	88.4 inches 224 cm
Height (cab)	89 inches 226 cm
2WD Ground clearance	13.9 inches 35 cm
4WD Ground clearance	10.1 inches 25 cm
2WD Front tread	48.8 inches 123 cm
4WD Front tread	47.7 inches 121 cm
Wide Front tread	58.8 inches 149 cm
Rear tread	50.7 inches 128 cm
Wide Rear tread	58.6 inches 148 cm

Fendt Farmer 280P Weight
	6107 lbs 2770 kg
2WD Max capacity	8818 lbs 3999 kg
4WD Max capacity	11023 lbs 5000 kg
Max Drawbar	2205 lbs 1000 kg

Photos

Fendt Farmer 280P tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Farmer 280P based on its 79.1 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Farmer 280P.

Estimated Continuous Field Runtime: 3.8 hrs

Approximately 3.8 hours of continuous field operation at ~75% rated power on a full tank (15.8 gal / 60 L).

Estimated 75% Load Fuel Burn~4.1 gal/hr (15.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours