Fendt Farmer 280V

The Fendt Farmer 280V is a tractor produced by Fendt. It is equipped with a 249.3 ci 4.1 L engine. The listed engine power is Diesel (listed): 79.1 hp / 59.0 kW. Transmission: 20 forward and reverse. Operating weight: 5004 to 5159 pounds.

Engine Power

Diesel (listed): 79.1 hp / 59.0 kW

Fuel & Capacities

15.85 gal 60.0 L

Transmission

20 forward and reverse

Operating Weight

5004 to 5159 pounds

Overview

	1987 - 2002 Farmer 200 SeriesOrchard/Vineyard tractor Farmer 200 Series Orchard/Vineyard tractor

Production
Manufacturer	Fendt
Orchard/Vineyard tractor

Fendt Farmer 280V Engine
KHD 4.1L 4-cyl diesel
Fuel tank	15.85 gal 60.0 L
Engine details ...

Fendt Farmer 280V Transmission
20-speed
Transmission details ...

Fendt Farmer 280V Power
Engine	79.1 hp 59.0 kW

Mechanical
Four-wheel drive
Power steering
Mechanical drum brakes
Two-post mid-mount folding ROPS. Cab available with heat and air-conditioning.

Hydraulics
Pressure	2611 psi 180.0 bar
Total flow	12.4 gpm 46.9 lpm

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/750
	540/750/1000 OptOptional

Dimensions & Tires
Wheelbase	82.6 inches 209 cm
Tall Wheelbase	83.7 inches 212 cm
Weight	5004 to 5159 pounds
Front tire	10.0/75-15.3
Rear tire	9.5-28
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	55
Charging volts	14
Battery volts	12
Battery AH	88

References

Farmer 250V 260V 270V 280V 280P published in 1996, by Fendt

Engine

Engine Detail — 249.3 ci / 4.1 L Diesel

Manufacturer	KHD F4L913
Fuel Type	Diesel
Configuration	4-cylinder, air-cooled
Displacement	249.3 ci 4.1 L
Bore/Stroke	4.02x4.92 inches 102 x 125 mm
Power	79.1 hp 59.0 kW
Rated RPM	2400
Torque	200.6 lb-ft 272.0 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Transmission

Transmission — 20 forward and 6 reverse

Gears

20 forward and 6 reverse

Transmission — 20 forward and reverse

Gears

20 forward and reverse

Dimensions

Fendt Farmer 280V Tires
Standard tires (ag)	Front: 10.0/75-15.3. Rear: 9.5-28
Wide Standard tires (ag)	Front: 11LR16. Rear: 13.6R24
Tall Standard tires (ag)	Front: 275/80R18. Rear: 13.6-28

Dimensions
Wheelbase	82.6 inches 209 cm
Tall Wheelbase	83.7 inches 212 cm
Length	135.6 inches 344 cm
Width	46.1 inches 117 cm
Wide Width	48.9 inches 124 cm
Tall Width	51.3 inches 130 cm
Ground clearance	8.7 inches 22 cm
Wide Ground clearance	10 inches 25 cm
Tall Ground clearance	11.3 inches 28 cm
Front tread	31.3 inches 79 cm
Wide Front tread	37.5 inches 95 cm
Tall Front tread	37.8 inches 96 cm

Fendt Farmer 280V Weight
	5004 lbs 2269 kg
Wide	5071 lbs 2300 kg
Tall	5159 lbs 2340 kg
Max capacity	7716 lbs 3499 kg
Max Drawbar	2205 lbs 1000 kg

Fendt Farmer 280V Height
ROPS	87.4 inches 221 cm
Wide ROPS	88.2 inches 224 cm
Tall ROPS	89 inches 226 cm
Cab	85.8 inches 217 cm
Wide/Tall Cab	86.6 inches 219 cm

Photos

Fendt Farmer 280V

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Farmer 280V based on its 79.1 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Farmer 280V.

Estimated Continuous Field Runtime: 3.8 hrs

Approximately 3.8 hours of continuous field operation at ~75% rated power on a full tank (15.8 gal / 60 L).

Estimated 75% Load Fuel Burn~4.1 gal/hr (15.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours