Fiat 90-90

The Fiat 90-90 is a tractor produced by Fiat. It is equipped with a 298.1 ci 4.9 L engine. The listed engine power is Diesel (listed): 90 hp / 67.1 kW. Transmission: 20 forward and 4 reverse. Operating weight: 8,533 lbs 3870 kg.

Engine Power
Diesel (listed): 90 hp / 67.1 kW
Fuel & Capacities
24.6 gal 93.1 L
Transmission
20 forward and 4 reverse
Operating Weight
8,533 lbs 3870 kg

Overview

Fiat 90-90 tractor photo
1984 - 1991 90 Series
Production
Manufacturer
Fiat
Variants
90-90
2WD
90-90DT
4WD
Fiat 90-90 Engine
Fiat 4.9L 5-cyl diesel
Engine details ...
Fiat 90-90 Power
Engine
90 hp 67.1 kW
Mechanical
Two- or four-wheel drive
Final drives
planetary
Differential lock
rear standard
Hydraulic wet disc brakes
Trailer brakes
hydraulic optional
Supercomfort cab with air-conditioning optional.
Capacity
Fuel
24.6 gal 93.1 L
35.1 gal 132.9 L
Hydraulic system
11.7 gal 44.3 L
Hydraulics
Type
open center
Capacity
11.7 gal 44.3 L
Pressure
2700 psi 186.2 bar
Valves
1 to 3
Pump flow
11.6 gpm 43.9 lpm
12.7 gpm 48.1 lpm
Power Take-off (PTO)
Rear PTO
independent
Clutch
304.8mm dry disc
Rear PTO Type
540/ground
540/1000/ground
Engine RPM
540@2124
1000@2409
Dimensions & Tires
Wheelbase
97.2 inches 246 cm
Weight
8533 to 9812 pounds
Front tire
7.50-18
Rear tire
13.6/12-28
Full dimensions and tires ...

Engine

Engine Detail — 298.1 ci / 4.9 L Diesel

Manufacturer
Fiat 8055.05
Fuel Type
Diesel
Configuration
5-cylinder, liquid-cooled
Displacement
298.1 ci 4.9 L
Bore/Stroke
4.0945x4.53 inches 104 x 115 mm
Power
90 hp 67.1 kW
Rated RPM
2500
Oil capacity
14.5 qts 13.7 L

Transmission

Transmission options
15-speed synchronized
20-speed creeper

Transmission — 15 forward and 3 reverse synchronized

Type
synchronized
Gears
15 forward and 3 reverse
Clutch
dry disc
Five gears, plus reverse, in three ranges. A 40 KPH gearbox was available with four-wheel drive.
90-90  synchronized speeds

Transmission — 20 forward and 4 reverse creeper

Type
creeper
Gears
20 forward and 4 reverse
Clutch
dry disc

Dimensions

Fiat 90-90 Tires
Ag front
7.50-18 (2WD)
7.50-20 (2WD)
11.2/10-28 (4WD)
13.6/12-24 (4WD)
Ag rear
13.6/12-28
16.9/14-34
Dimensions
Wheelbase
97.2 inches 246 cm
Length
151.6 inches 385 cm
Height
102.4 inches 260 cm
Weight
8,533 lbs 3870 kg
9,812 lbs (4WD) 4450 kg

Photos

Fiat 90-90

Fiat 90-90

Recommended Implements & Sizing Guide

Engineering recommendations for Fiat 90-90 based on its 90 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fiat 90-90.

Estimated Continuous Field Runtime: 5.3 hrs

Approximately 5.3 hours of continuous field operation at ~75% rated power on a full tank (24.6 gal / 93.1 L).

Estimated 75% Load Fuel Burn~4.7 gal/hr (17.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Fiat 90-90 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Fiat 90-90.

Converted Equivalents:

Horsepower (HP)90 hp
Kilowatts (kW)67.1 kW
Metric Horsepower (PS / CV)91.2 PS

Direct Competitor Comparison

Compare Fiat 90-90 against same-era industry alternatives in the same horsepower class.

Current Model
Fiat

Fiat 90-90

Engine Power:Diesel (listed): 90 hp / 67.1 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 2660 HD

Engine Power:81
Production Years:2010 - 2013
DeereMarket Competitor

Deere 5420

Engine Power:81
Production Years:2001 - 2004
International HarvesterMarket Competitor

International Harvester 884

Engine Power:81
Production Years:1979 - 1984
KubotaMarket Competitor

Kubota M7500

Engine Power:81
Production Years:1979 - 1986
  • Fiat 750

    Power:
    75
    Production years:
    1967 - 1971
  • Fiat 765C

    Power:
    77
    Production years:
    1982 - 1984
  • Fiat 766

    Power:
    78
    Production years:
    1984 - 1986
  • Fiat 780

    Power:
    78
    Production years:
    1975 - 1984
  • Fiat 80-65

    Power:
    78.9
    Production years:
    1985 - 1989