Force Motors Balwan 500

The Force Motors Balwan 500 is a tractor produced by Force Motors. It is equipped with a 158.4 ci 2.6 L engine. The listed engine power is Diesel (listed): 50 hp / 37.3 kW. Transmission: synchromesh.

Engine Power

Diesel (listed): 50 hp / 37.3 kW

Fuel & Capacities

15.8 gal 59.8 L

Transmission

synchromesh

Overview

	2006 - ????	2006 - ????

2006 - ????

Production
Manufacturer	Force Motors
Built in India

Force Motors Balwan 500 Engine
2.6L 4-cyl diesel
Fuel tank	15.8 gal 59.8 L
Engine details ...

Force Motors Balwan 500 Transmission
8-speed
Transmission details ...

Force Motors Balwan 500 Power
Engine	50 hp 37.3 kW

Mechanical
Steering	mechanical
Wet disc brakes

Tractor hitch
Rear Type	I,II
Rear lift (at ends)	3,252 lbs 1475 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	77.2 inches 196 cm
Front tire	6.00x16
Rear tire	13.6x28
Full dimensions and tires ...

Electrical
Charging amps	23
Battery volts	12

Engine

	2006 - ????	2006 - ????

2006 - ????

Engine Detail — 158.4 ci / 2.6 L Diesel

Manufacturer	TD2600F
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	158.4 ci 2.6 L
Bore/Stroke	3.579x3.937 inches 91 x 100 mm
Power	50 hp 37.3 kW
Compression	18.5:1
Oil capacity	4.5 qts 4.3 L

Transmission

	2006 - ????	2006 - ????

2006 - ????

Transmission — synchromesh

Transmission	synchromesh
Gears	8 forward and 4 reverse

Dimensions

	2006 - ????	2006 - ????

2006 - ????

Force Motors Balwan 500 Tires
Ag front	6.00x16
Ag rear	13.6x28

Dimensions
Wheelbase	77.2 inches 196 cm
Length	131.5 inches 334 cm
Width	66.5 inches 168 cm
Ground clearance	15.8 inches 40 cm

Photos

Force Motors Balwan 500 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Force Motors Balwan 500 based on its 50 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Force Motors Balwan 500.

Estimated Continuous Field Runtime: 6.1 hrs

Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (15.8 gal / 59.8 L).

Estimated 75% Load Fuel Burn~2.6 gal/hr (9.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours