Ford 2910
The Ford 2910 is a tractor produced by Ford. It is equipped with a 175 ci 2.9 L engine. The listed engine power is Diesel (listed): 40.5 hp / 30.2 kW; Diesel (gross): 44 hp / 32.8 kW. Transmission: Dual Range. Operating weight: 4413 to 4948 pounds.
Engine Power
Diesel (listed): 40.5 hp / 30.2 kW; Diesel (gross): 44 hp / 32.8 kW
Fuel & Capacities
13 gal
49.2 L
Transmission
Dual Range
Operating Weight
4413 to 4948 pounds
Overview
![]() | 1983 - 1989
10 Utility SeriesUtility tractor
10 Utility Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Ford |
Utility tractor | |
Original price was $16,000 in 1989 | |
Variants | |
|---|---|
2910 | utility tractor |
2910 LCG | mowing tractor |
Ford 2910 Engine | |
|---|---|
Ford 2.9L 3-cyl diesel | |
Engine details ... |
Ford 2910 Power | |
|---|---|
Engine (gross) | 44 hp
32.8 kW |
Engine | 40.5 hp
30.2 kW |
PTO (claimed) | 36 hp
26.8 kW |
Drawbar (tested) | 29.09 hp
21.7 kW |
PTO (tested) | 36.62 hp
27.3 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | inboard planetary |
Differential lock | mechanical rear |
Steering | power assist |
Differential wet disc brakes | |
Two-post fixed ROPS. Cab optional. | |
Capacity | |
|---|---|
Fuel | 13 gal
49.2 L |
Hydraulic system | 12.1 gal
45.8 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 12.1 gal
45.8 L |
Pressure | 2500 psi
172.4 bar |
Pump flow | 7.7 gpm
29.1 lpm |
12.8 gpmOptOptional
48.4 lpm | |
Steering flow | 3.6 gpm
13.6 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position and top-link draft control |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 |
Engine RPM | 540@1800 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 77.5 inches
196 cm |
4WD Wheelbase | 84.1 inches
213 cm |
Weight | 4413 to 4948 pounds |
Front tire | 5.50-16 |
Rear tire | 12.4-28 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Mk I Charging amps | 32 |
Mk II Charging amps | 51 |
Battery volts | 12 |
Battery AH | 128 |
References | |
|---|---|
![]() | |
Farm Loaders published in 1988, by Ford | |
Front-end Loaders published in 1989, by Ford | |
Front-end Loaders published in 1992, by Ford | |
Front-end Loaders published in 1995, by New Holland | |
32-52 hp Tractors published in 1985, by Ford | |
32-52 hp Tractors published in 1986, by Ford | |
32-52 hp Tractors published in 1987, by Ford | |
2910 - 3910 published in 1983, by Ford | |
Tractor Buyer's Guide published in 1989, by Ford | |
Sales Reference Guide published in 1986, by Ford |
Engine
Engine Detail — 175 ci / 2.9 L Diesel
Manufacturer | Ford |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 175 ci
2.9 L |
Bore/Stroke | 4.2x4.2 inches
107 x 107 mm |
Power | 40.5 hp
30.2 kW |
Power (gross) | 44 hp
32.8 kW |
Air cleaner | dry |
Compression | 17.3:1 |
Rated RPM | 2000 |
Torque | 118 lb-ft
160.0 Nm |
Torque RPM | 1400 |
Starter volts | 12 |
Oil capacity | 7 qts
6.6 L |
Coolant capacity | 11 qts
10.4 L |
Transmission
Transmission options | |
|---|---|
8-speed | |
8-speed synchromesh | |
6-speed mechanical shuttle |
Transmission — Dual Range
Transmission | Dual Range |
Gears | 8 forward and 2 reverse |
Clutch | 330mm dry disc |
Oil capacity | 12.7 qts
12.0 L |
With 13.6x28 rear tires. | |
![]() | |
Transmission — 8 forward and 4 reverse synchromesh
Type | synchromesh |
Gears | 8 forward and 4 reverse |
Oil capacity | 9.9 qts
9.4 L |
With 12.4x28 rear tires. | |
![]() | |
Transmission — 6 forward and 4 reverse mechanical shuttle
Type | mechanical shuttle |
Gears | 6 forward and 4 reverse |
![]() | |
Dimensions
Ford 2910 Tires | |
|---|---|
Ag front | 5.50-16 (2WD) |
8.3-24 (4WD) | |
Ag rear | 12.4-28 |
Ag front | 6.00-16 (2WD) |
Ag rear | 16.9-24 |
13.6-28 | |
Dimensions | |
|---|---|
2WD Wheelbase | 77.5 inches
196 cm |
4WD Wheelbase | 84.1 inches
213 cm |
Length | 127.2 inches
323 cm |
Width | 68.4 inches
173 cm |
2WD Clearance (front axle) | 21.5 inches
54 cm |
4WD Clearance (front axle) | 13.1 inches
33 cm |
Clearance (rear axle) | 20.5 inches
52 cm |
2WD Front tread | 52 to 80 inches
132 to 203 cm |
4WD Front tread | 56 to 72 inches
142 to 182 cm |
Rear tread | 56 to 80 inches
142 to 203 cm |
Ford 2910 Weight | |
|---|---|
2WD Operating | 4413 lbs
2001 kg |
4WD Operating | 4948 lbs
2244 kg |
Ballasted | 6000 lbs
2721 kg |
Ford 2910 Height | |
|---|---|
Steering wheel | 58.8 inches
149 cm |
Hood | 52.7 inches
133 cm |
ROPS | 93.7 inches
237 cm |
Exhaust | 81.2 inches
206 cm |
Tests
Tractor Tests | |
|---|---|
NTTL 1491: diesel 8x2 2WD | |
NTTL 1492: diesel 8x4 synchro 2WD |
Nebraska Tractor Test 1491 | |
|---|---|
Diesel 8x2 2WD
September 14 - 28, 1983
Link: Nebraska Tractor Test 1491 file | |
PTO performance | |
Power at rated engine speed | 36.62 hp
27.3 kW |
Fuel use | 2.3 gal/hour
8.7 l/hour |
Power at rated PTO speed | 35.09 hp
26.2 kW |
Fuel use | 2.2 gal/hour
8.3 l/hour |
Drawbar performance | |
Max power | 29.09 hp
21.7 kW |
Fuel use | 2.2 gal/hour
8.3 l/hour |
Gear 5 used for power test. | |
Max pull | 4,237 lbs
1921 kg |
Gear 2 used for pull test. | |
Nebraska Tractor Test 1492 | |
|---|---|
Diesel 8x4 synchro 2WD
September 14 - 26, 1983
Link: Nebraska Tractor Test 1492 file | |
PTO performance | |
Power at rated engine speed | 36.40 hp
27.1 kW |
Fuel use | 2.3 gal/hour
8.7 l/hour |
Power at rated PTO speed | 34.75 hp
25.9 kW |
Fuel use | 2.2 gal/hour
8.3 l/hour |
Attachments
Attachment overview | |
|---|---|
Ford 776A loader | |
Ford 776B loader | |
Ford 7309 loader | |
Ford 7310 loader |
Photos
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 2910.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ford 2910 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 2910.
Converted Equivalents:
Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS
Direct Competitor Comparison
Compare Ford 2910 against same-era industry alternatives in the same horsepower class.
Current Model
Ford
Ford 2910
Engine Power:Diesel (listed): 40.5 hp / 30.2 kW; Diesel (gross): 44 hp / 32.8 kW
★ Baseline Reference







