Ford 4630

The Ford 4630 is a tractor produced by Ford. It is equipped with a 201 ci 3.3 L engine. The listed engine power is Diesel (listed): 63 hp / 47.0 kW. Transmission: 8 forward and 2 reverse. Operating weight: 4888 to 5900 pounds.

Engine Power
Diesel (listed): 63 hp / 47.0 kW
Fuel & Capacities
16 gal 60.6 L
Transmission
8 forward and 2 reverse
Operating Weight
4888 to 5900 pounds

Overview

No photo available
1992 - 1997 30 Superforça Series
Production
Manufacturer
Ford (a part of New Holland)
Built in Curitiba, Brazil
Ford 4630 Engine
Ford 3.3L 3-cyl diesel
Engine details ...
Ford 4630 Transmission
8-speed constant mesh
Transmission details ...
Ford 4630 Power
Engine
63 hp 47.0 kW
PTO (claimed)
55 hp 41.0 kW
Mechanical
Two- or four-wheel drive
Differential lock
mechanical rear
Manual steering
Mechanical wet disc brakes
Two-post ROPS.
Capacity
Fuel
16 gal 60.6 L
Hydraulic system
12 gal 45.4 L
Hydraulics
Type
open center
Capacity
12 gal 45.4 L
Pressure
2503 psi 172.6 bar
Pump flow
8.5 gpm 32.2 lpm
Tractor hitch
Rear Type
II
Control
position and draft control
Rear lift (at 24"/610mm)
3638 lbs 1650 kg
Power Take-off (PTO)
Rear PTO
independent
Clutch
hydraulic
Rear PTO Type
540 (1.375)
Engine RPM
540@1800
Dimensions & Tires
2WD Wheelbase
84.7 inches 215 cm
4WD Wheelbase
84.1 inches 213 cm
Weight
4888 to 5900 pounds
Front tire
6.00x16
2WD Rear tire
14.9/13x28
Full dimensions and tires ...
Electrical
Charging system
alternator
Charging amps
55
Battery volts
12
Battery AH
100

Engine

Engine Detail — 201 ci / 3.3 L Diesel

Manufacturer
Ford OHV 3.201
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled
Displacement
201 ci 3.3 L
Bore/Stroke
4.4x4.4 inches 112 x 112 mm
Power
63 hp 47.0 kW
Fuel system
direct injection
Air cleaner
dual stage dry
Compression
16.3:1
Rated RPM
2200
Torque
159.1 lb-ft 215.7 Nm
Torque RPM
1400
Starter
electric
Starter volts
12
Oil capacity
7 qts 6.6 L
Coolant capacity
11 qts 10.4 L

Transmission

Transmission — 8 forward and 2 reverse constant mesh

Type
constant mesh
Gears
8 forward and 2 reverse
Clutch
305mm dry disc
Oil capacity
12.7 qts 12.0 L
With 16.9/14x30 rear tires.
4630  constant mesh speeds

Dimensions

Ford 4630 Tires
2WD Standard tires (ag)
Front: 6.00x16. Rear: 14.9/13x28
4WD Standard tires (ag)
Front: 12.4x24. Rear: 18.4x30
Dimensions
2WD Wheelbase
84.7 inches 215 cm
4WD Wheelbase
84.1 inches 213 cm
2WD Length
152.2 inches 386 cm
4WD Length
145.2 inches 368 cm
2WD Width
67.5 inches 171 cm
4WD Width
76.9 inches 195 cm
2WD Shipping weight
4888 lbs 2217 kg
4WD Shipping weight
5900 lbs 2676 kg
2WD Clearance (front axle)
20.3 inches 51 cm
4WD Clearance (front axle)
15.4 inches 39 cm
2WD Clearance (rear axle)
18.7 inches 47 cm
4WD Clearance (rear axle)
14.5 inches 36 cm
2WD Front tread
52 to 80 inches 132 to 203 cm
4WD Front tread
64.8 to 72.4 inches 164 to 183 cm
Rear tread
60 to 80 inches 152 to 203 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Ford 4630 based on its 63 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 4630.

Estimated Continuous Field Runtime: 4.9 hrs

Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (16 gal / 60.6 L).

Estimated 75% Load Fuel Burn~3.3 gal/hr (12.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Ford 4630 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 4630.

Converted Equivalents:

Horsepower (HP)63 hp
Kilowatts (kW)47 kW
Metric Horsepower (PS / CV)63.9 PS

Direct Competitor Comparison

Compare Ford 4630 against same-era industry alternatives in the same horsepower class.

Current Model
Ford

Ford 4630

Engine Power:Diesel (listed): 63 hp / 47.0 kW
★ Baseline Reference
DeereMarket Competitor

Deere 2100

Engine Power:57
Production Years:1993 - 1998
Massey FergusonMarket Competitor

Massey Ferguson 253

Engine Power:57
Production Years:1988 - 1998
CockshuttMarket Competitor

Cockshutt 1355

Engine Power:56.7
Production Years:1969 - 1971
OliverMarket Competitor

Oliver 1355

Engine Power:56.7
Production Years:1969 - 1971