Ford 5030
The Ford 5030 is a tractor produced by Ford. It is equipped with a 268 ci 4.4 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: 8 forward and 2 reverse. Operating weight: 5631 lbs 2554 kg.
Engine Power
Diesel (listed): 75 hp / 55.9 kW
Fuel & Capacities
21.1 gal
79.9 L
Transmission
8 forward and 2 reverse
Operating Weight
5631 lbs
2554 kg
Overview
 | 1992 - 1997
30 Superforça Series |
|---|
Production | |
|---|---|
Manufacturer | Ford (a part of New Holland) |
Built in Curitiba, Brazil | |
Ford 5030 Engine | |
|---|---|
Ford 4.4L 4-cyl diesel | |
Engine details ...  |
Ford 5030 Transmission | |
|---|---|
8-speed constant mesh | |
Transmission details ...  |
Ford 5030 Power | |
|---|---|
Engine | 75 hp
55.9 kW |
PTO (claimed) | 65 hp
48.5 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | mechanical rear |
Manual steering | |
Mechanical wet disc brakes | |
Two-post ROPS. | |
Capacity | |
|---|---|
Fuel | 21.1 gal
79.9 L |
Hydraulic system | 12 gal
45.4 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 12 gal
45.4 L |
Pressure | 2503 psi
172.6 bar |
Pump flow | 8.5 gpm
32.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift (at 24"/610mm) | 3638 lbs
1650 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | hydraulic |
Rear PTO Type | 540 (1.375) |
Engine RPM | 540@1800 |
Dimensions & Tires | |
|---|---|
Wheelbase | 87.4 inches
221 cm |
Weight | 5631 lbs
2554 kg |
Front tire | 7.50x16 |
Rear tire | 16.9/14x30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 55 |
Battery volts | 12 |
Battery AH | 100 |
Engine
Engine Detail — 268 ci / 4.4 L Diesel
Manufacturer | Ford OHV 4.268 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 268 ci
4.4 L |
Bore/Stroke | 4.4x4.4 inches
112 x 112 mm |
Power | 75 hp
55.9 kW |
Fuel system | direct injection |
Air cleaner | dual stage dry |
Compression | 16.3:1 |
Rated RPM | 2200 |
Torque | 206.5 lb-ft
280.0 Nm |
Torque RPM | 1200 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 14.4 qts
13.6 L |
Coolant capacity | 16.1 qts
15.2 L |
Transmission
Transmission — 8 forward and 2 reverse constant mesh
Type | constant mesh |
Gears | 8 forward and 2 reverse |
Clutch | 305mm dry disc |
Oil capacity | 12.7 qts
12.0 L |
With 16.9/14x30 rear tires. | |
 | |
Dimensions
Ford 5030 Tires | |
|---|---|
Standard tires (ag) | Front: 7.50x16. Rear: 16.9/14x30 |
Dimensions | |
|---|---|
Wheelbase | 87.4 inches
221 cm |
Length | 159.6 inches
405 cm |
Width | 67.5 inches
171 cm |
Shipping weight | 5631 lbs
2554 kg |
Clearance (front axle) | 12.4 inches
31 cm |
Clearance (rear axle) | 18.5 inches
46 cm |
Front tread | 55 to 78 inches
139 to 198 cm |
Rear tread | 60 to 80 inches
152 to 203 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Ford 5030 based on its 75 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 5030.
Estimated Continuous Field Runtime: 5.4 hrs
Approximately 5.4 hours of continuous field operation at ~75% rated power on a full tank (21.1 gal / 79.9 L).
Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ford 5030 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 5030.
Converted Equivalents:
Horsepower (HP)75 hp
Kilowatts (kW)55.9 kW
Metric Horsepower (PS / CV)76 PS
Direct Competitor Comparison
Compare Ford 5030 against same-era industry alternatives in the same horsepower class.
Current Model
Ford
Ford 5030
Engine Power:Diesel (listed): 75 hp / 55.9 kW
★ Baseline Reference