Ford 6410 Mark III

The Ford 6410 Mark III is a tractor produced by Ford. It is equipped with a 268.1 ci 4.4 L engine. The listed engine power is Diesel (listed): 80 hp / 59.7 kW. Transmission: 16 forward and 8 reverse. Operating weight: 7540 to 8400 pounds.

Engine Power

Diesel (listed): 80 hp / 59.7 kW

Fuel & Capacities

28 gal 106.0 L

Transmission

16 forward and 8 reverse

Operating Weight

7540 to 8400 pounds

Overview

	1988 - 1991 10 Mark III Series

Production
Manufacturer	Ford

Ford 6410 Engine
Ford 4.4L 4-cyl diesel
Fuel tank	28 gal 106.0 L
Engine details ...

Ford 6410 Transmission
16-speed
Transmission details ...

Ford 6410 Power
Engine	80 hp 59.7 kW

Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes

Hydraulics
Pump flow	18.2 gpm 68.9 lpm

Tractor hitch
Rear lift	5,666 lbs 2570 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	87.4 inches 221 cm
Weight	7540 to 8400 pounds
Front tire	10.00-16
Rear tire	16.9-34
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 268.1 ci / 4.4 L Diesel

Manufacturer	Ford
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	268.1 ci 4.4 L
Bore/Stroke	4.40x4.40 inches 112 x 112 mm
Power	80 hp 59.7 kW
Rated RPM	2070
Torque	217.6 lb-ft 295.1 Nm
Torque RPM	1200
Starter volts	12

Transmission

Transmission — 16 forward and 8 reverse

Gears

16 forward and 8 reverse

Dimensions

Ford 6410 Tires
Ag front	10.00-16 (2WD)
	13.6-24 (4WD)
Ag rear	16.9-34

Dimensions
Wheelbase	87.4 inches 221 cm
Length	116 inches 294 cm
Height	106.3 inches 270 cm
2WD Weight	7540 lbs 3420 kg
4WD Weight	8400 lbs 3810 kg

Photos

Ford 6410 Mark III tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Ford 6410 Mark III based on its 80 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 6410 Mark III.

Estimated Continuous Field Runtime: 6.7 hrs

Approximately 6.7 hours of continuous field operation at ~75% rated power on a full tank (28 gal / 106 L).

Estimated 75% Load Fuel Burn~4.2 gal/hr (15.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours