Ford 7400
The Ford 7400 is a tractor produced by Ford. It is equipped with a 379.6 ci 6.2 L engine. The listed engine power is Diesel (listed): 100 hp / 74.6 kW. Transmission: Dual Power. Operating weight: 6945 lbs 3150 kg.
Engine Power
Diesel (listed): 100 hp / 74.6 kW
Fuel & Capacities
19.8 gal
74.9 L
Transmission
Dual Power
Operating Weight
6945 lbs
3150 kg
Overview
 | Row-Crop tractor | Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Ford |
Row-Crop tractor | |
Built in Andenne, Belgium | |
The Ford 7400 was converted by EVA of Belgium. | |
Ford 7400 Engine | |
|---|---|
Ford 6.2L 6-cyl diesel | |
Engine details ...  |
Ford 7400 Transmission | |
|---|---|
14-speed | |
Transmission details ...  |
Ford 7400 Power | |
|---|---|
Engine | 100 hp
74.6 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. Four-post ROPS and cab available. |
Capacity | |
|---|---|
Fuel | 19.8 gal
74.9 L |
Hydraulic system | 14.8 gal
56.0 L |
Hydraulics | |
|---|---|
Capacity | 14.8 gal
56.0 L |
Pump flow | 9.3 gpm
35.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Engine RPM | 540@1900 |
1000@2050 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 139 inches
353 cm |
Weight | 6945 lbs
3150 kg |
Front tire | 7.50-20 |
Rear tire | 16.9/14-38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 46 |
Battery volts | 12 |
Battery AH | 128 |
References | |
|---|---|
 | |
7400 published by Ford |
Engine
Engine Detail — 379.6 ci / 6.2 L Diesel
Manufacturer | Ford |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled inline |
Displacement | 379.6 ci
6.2 L |
Bore/Stroke | 4.21x4.53 inches
107 x 115 mm |
Power | 100 hp
74.6 kW |
Fuel system | direct injection |
Compression | 16:1 |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 13.2 qts
12.5 L |
Coolant capacity | 19.6 qts
18.5 L |
Ford 7400 Engine | |
|---|---|
 |
Transmission
Transmission — Dual Power
Transmission | Dual Power |
Gears | 14 forward and 4 reverse |
Clutch | 330mm dry disc |
Oil capacity | 59.2 qts
56.0 L |
Seven gears, plus two reverse, in two ranges. | |
With 16.9/14-38 rear tires. | |
 | |
Dimensions
Ford 7400 Tires | |
|---|---|
Ag front | 7.50-20 |
Ag rear | 16.9/14-38 |
Dimensions | |
|---|---|
Wheelbase | 139 inches
353 cm |
Length | 153.5 inches
389 cm |
Width | 70.9 inches
180 cm |
Height (steering wheel) | 65 inches
165 cm |
Weight | 6945 lbs
3150 kg |
Clearance (front axle) | 17.7 inches
44 cm |
Clearance (rear axle) | 16.1 inches
40 cm |
Photos
Ford 7400
Recommended Implements & Sizing Guide
Engineering recommendations for Ford 7400 based on its 100 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 7400.
Estimated Continuous Field Runtime: 3.8 hrs
Approximately 3.8 hours of continuous field operation at ~75% rated power on a full tank (19.8 gal / 75 L).
Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ford 7400 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 7400.
Converted Equivalents:
Horsepower (HP)100 hp
Kilowatts (kW)74.6 kW
Metric Horsepower (PS / CV)101.4 PS
Direct Competitor Comparison
Compare Ford 7400 against same-era industry alternatives in the same horsepower class.
Current Model
Ford
Ford 7400
Engine Power:Diesel (listed): 100 hp / 74.6 kW
★ Baseline Reference
Related models
Ford 5630
- Power:
- 80
- Production years:
- 1992 - 1997
Ford 6410
- Power:
- 80
- Production years:
- 1988 - 1991
Ford 6610S
- Power:
- 85
- Production years:
- 1994 - 2003
Ford 6610
- Power:
- 86
- Production years:
- 1988 - 1991
Ford 7200
- Power:
- 89
- Production years:
- 1973 - 1975