Ford 7710
The Ford 7710 is a tractor produced by Ford. It is equipped with a 268 ci 4.4 L engine. The listed engine power is Diesel (gross): 97 hp / 72.3 kW. Transmission: Dual Power. Operating weight: 6587 to 8650 pounds.
Engine Power
Diesel (gross): 97 hp / 72.3 kW
Fuel & Capacities
47 gal
177.9 L
Transmission
Dual Power
Operating Weight
6587 to 8650 pounds
Overview
 | 1982 - 1990
10 SeriesRow-Crop tractor
10 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Ford |
Row-Crop tractor | |
Factories | Romeo, Michigan, USA |
Basildon, England | |
Original price was $28,000 in 1990 | |
Variants | |
|---|---|
7610 | utility |
7710 | row-crop |
Ford 7710 Engine | |
|---|---|
Ford 4.4L 4-cyl diesel | |
Engine details ...  |
Ford 7710 Power | |
|---|---|
Engine (gross) | 97 hp
72.3 kW |
PTO (claimed) | 86 hp
64.1 kW |
Drawbar (tested) | 74.08 hp
55.2 kW |
PTO (tested) | 86.95 hp
64.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Differential mechanical wet disc brakes | |
Two-post ROPS. Cab optional with air-conditioning. | |
Capacity | |
|---|---|
Fuel | 47 gal
177.9 L |
Hydraulic system | 15 gal
56.8 L |
Hydraulics | |
|---|---|
Type | open center *Open center pump with closed-center remote valves. |
Capacity | 15 gal
56.8 L |
Pressure | 2500 psi
172.4 bar |
Valves | 2 |
Pump flow | 18.2 gpm
68.9 lpm |
Steering flow | 2.74 gpm
10.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Rear lift (at 24"/610mm) | 4473 lbs
2028 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Engine RPM | 540@1902 |
1000@2059 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 101.6 inches
258 cm |
4WD Wheelbase | 97.6 inches
247 cm |
Weight | 6587 to 8650 pounds |
Front tire | 7.50-16 |
Rear tire | 15.5-38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
ROPS Charging amps | 51 |
Cab Charging amps | 71 |
Battery volts | 12 |
Battery AH | 128 |
References | |
|---|---|
 | |
Farm Loaders published in 1982, by Ford | |
Farm Loaders published in 1988, by Ford | |
Front-end Loaders published in 1989, by Ford | |
Front-end Loaders published in 1992, by Ford | |
Front-end Loaders published in 1995, by New Holland | |
62-86 hp Tractors published in 1986, by Ford | |
If you're looking for tractor quality, look to Ford published in 1982 | |
62-86hp Tractors published in 1982, by Ford | |
62-86hp Tractors published in 1984, by Ford | |
62 to 86 PTO hp Tractors published in 1989, by Ford | |
Salesman's Reference published in 1981, by Ford | |
10 Series Tractors Repair Manual (SE 3870) published in 1989 | |
Tractor Buyer's Guide published in 1989, by Ford | |
Sales Reference Guide published in 1986, by Ford |
Engine
Engine Detail — 268 ci / 4.4 L Diesel
Manufacturer | Ford |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 268 ci
4.4 L |
Bore/Stroke | 4.4x4.4 inches
112 x 112 mm |
Power (gross) | 97 hp
72.3 kW |
Air cleaner | dual paper elements |
Compression | 15.6:1 |
Rated RPM | 2100 |
Torque | 278 lb-ft
377.0 Nm |
Starter volts | 12 |
Oil capacity | 9 qts
8.5 L |
Coolant capacity | 18 qts
17.0 L |
Transmission
Transmission options | |
|---|---|
8-speed | |
16-speed two-speed power shift | |
16-speed synchromesh partial power shift |
Transmission — Dual-range
Transmission | Dual-range |
Gears | 8 forward and 2 reverse |
With 18.4x34 rear tires. | |
 | |
Transmission — Dual Power
Transmission | Dual Power |
Type | two-speed power shift |
Gears | 16 forward and 4 reverse |
Clutch | 330mm dry disc |
The Dual Power adds a shift-on-the-move to an under-speed on the basic 8/2 gear transmission. | |
With 18.4x34 rear tires. | |
 | |
Transmission — Dual Power
Transmission | Dual Power |
Type | synchromesh partial power shift |
Gears | 16 forward and 8 reverse |
Clutch | 330mm dry disc |
A shift-on-the-move under-speed added to the 8/4 synchromesh transmission. | |
With 18.4x34 rear tires. | |
 | |
Dimensions
Ford 7710 Tires | |
|---|---|
Ag front | 7.50-16 (2WD) |
11.2-24 (4WD) | |
Ag rear | 15.5-38 |
Ag front | 7.50-18 (2WD) |
10.00-16 (2WD) | |
13.6-24 (4WD) | |
14.9-24 (4WD) | |
Ag rear | 18.4-30 |
16.9-34 | |
18.4-34 | |
16.9-38 | |
Dimensions | |
|---|---|
2WD Wheelbase | 101.6 inches
258 cm |
4WD Wheelbase | 97.6 inches
247 cm |
2WD Length | 151.3 inches
384 cm |
4WD Length | 154.7 inches
392 cm |
Width | 76.9 inches
195 cm |
Ground clearance | 20.7 inches
52 cm |
24.8 inches (optional front axle)
62 cm | |
2WD Front tread | 58.5 to 86.5 inches
148 to 219 cm |
4WD Front tread | 60 to 79 inches
152 to 200 cm |
Rear tread | 60 to 80 inches
152 to 203 cm (manual) |
Rear tread | 56 to 90 inches
142 to 228 cm (power) |
Ford 7710 Weight | |
|---|---|
Shipping | 6587 lbs
2987 kg |
Operating | 8650 lbs
3923 kg |
Ballasted | 10800 lbs
4898 kg |
Ford 7710 Height | |
|---|---|
Steering wheel | 86.3 inches
219 cm |
ROPS | 111 inches
281 cm |
Cab | 114.6 inches
291 cm |
Exhaust | 116.8 inches
296 cm |
Tests
Tractor Tests | |
|---|---|
NTTL 1432: diesel 16/4 4WD | |
NTTL 1433: diesel 16/8 powershift 2WD |
Nebraska Tractor Test 1432 | |
|---|---|
Diesel 16/4 4WD
April 14 - May 10, 1982
Link: Nebraska Tractor Test 1432 file | |
PTO performance | |
Power at rated engine speed | 86.95 hp
64.8 kW |
Fuel use | 5.6 gal/hour
21.2 l/hour |
Power at rated PTO speed | 86.79 hp
64.7 kW |
Fuel use | 1.0 gal/hour
3.8 l/hour |
Drawbar performance | |
Max power | 74.08 hp
55.2 kW |
Fuel use | 5.5 gal/hour
20.8 l/hour |
Gear 6L used for power test. | |
Max pull | 8,804 lbs
3993 kg |
Gear 3L used for pull test. | |
Nebraska Tractor Test 1433 | |
|---|---|
Diesel 16/8 powershift 2WD
April 2 - May 3, 1982
Link: Nebraska Tractor Test 1433 file | |
PTO performance | |
Power at rated engine speed | 86.62 hp
64.6 kW |
Fuel use | 5.5 gal/hour
20.8 l/hour |
Power at rated PTO speed | 86.55 hp
64.5 kW |
Fuel use | 5.5 gal/hour
20.8 l/hour |
Drawbar performance | |
Max power | 72.33 hp
53.9 kW |
Fuel use | 5.3 gal/hour
20.1 l/hour |
Gear 6L used for power test. | |
Max pull | 8,638 lbs
3918 kg |
Gear 3L used for pull test. | |
Attachments
Attachment overview | |
|---|---|
Ford 777B loader | |
Ford 777D loader | |
Ford 777F loader | |
Ford 7412 loader | |
Three loaders were available. The 777B was available for two-wheel drive tractors. The 777D could be fitted to 2WD models with ROPS. The 777F loader fit four-wheel drive tractors with ROPS or cab. |
Photos
Ford 7710
Recommended Implements & Sizing Guide
Engineering recommendations for Ford 7710 based on its 97 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 7710.
Estimated Continuous Field Runtime: 9.3 hrs
Approximately 9.3 hours of continuous field operation at ~75% rated power on a full tank (47 gal / 177.9 L).
Estimated 75% Load Fuel Burn~5 gal/hr (19.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ford 7710 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 7710.
Converted Equivalents:
Horsepower (HP)97 hp
Kilowatts (kW)72.3 kW
Metric Horsepower (PS / CV)98.3 PS
Direct Competitor Comparison
Compare Ford 7710 against same-era industry alternatives in the same horsepower class.
Current Model
Ford
Ford 7710
Engine Power:Diesel (gross): 97 hp / 72.3 kW
★ Baseline Reference