Hinomoto C144
The Hinomoto C144 is a tractor produced by Hinomoto. It is equipped with a 52.8 ci 0.9 L engine. The listed engine power is Diesel (gross): 17 hp / 12.7 kW. Transmission: 6 forward and 2 reverse. Operating weight: 1473 lbs 668 kg.
Engine Power
Diesel (gross): 17 hp / 12.7 kW
Fuel & Capacities
3.7 gal
14.0 L
Transmission
6 forward and 2 reverse
Operating Weight
1473 lbs
668 kg
Overview
 | 1980 - 1985
Concord SeriesCompact Utility tractor
Concord Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Hinomoto |
Compact Utility tractor | |
Built in Japan | |
Variants | |
|---|---|
C142 | 2WD |
C144 | 4WD |
Hinomoto C144 Engine | |
|---|---|
Toyosha 0.9L 3-cyl diesel | |
Fuel tank | 3.7 gal
14.0 L |
Engine details ...  | |
Hinomoto C144 Transmission | |
|---|---|
6-speed gear | |
Transmission details ...  |
Hinomoto C144 Power | |
|---|---|
Engine (gross) | 17 hp
12.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | mechanical rear |
Manual steering | |
Mechanical drum brakes | |
Open operator station. | |
Hydraulics | |
|---|---|
Type | open center |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
Power Take-off (PTO) | |
|---|---|
Rear PTO | transmission |
Rear PTO Type | 540 (1.375) |
Engine RPM | 571@2500 |
833@2500 | |
Mid PTO Type | pulley |
Front PTO | independent OptOptional |
Clutch | electric |
Dimensions & Tires | |
|---|---|
Wheelbase | 50.8 inches
129 cm |
Weight | 1473 lbs
668 kg |
Front tire | 5-12 |
Rear tire | 8-16 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 13 |
Battery volts | 12 |
References | |
|---|---|
 | |
C142/C144 published in 1983, by Hinomoto |
Engine
Engine Detail — 52.8 ci / 0.9 L Diesel
Manufacturer | Toyosha CS86 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled inline |
Displacement | 52.8 ci
0.9 L |
Bore/Stroke | 2.76x2.95 inches
70 x 75 mm |
Power (gross) | 17 hp
12.7 kW |
Air cleaner | dry |
Pre-heating | glow plugs |
Compression | 23:1 |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 2.3 qts
2.2 L |
Coolant capacity | 3.2 qts
3.0 L |
Transmission
Transmission — 6 forward and 2 reverse gear
Type | gear |
Gears | 6 forward and 2 reverse |
Clutch | dry disc |
Oil capacity | 18 qts
17.0 L |
With 8-16 rear tires. | |
 | |
Dimensions
Hinomoto C144 Tires | |
|---|---|
Standard tires (ag) | Front: 5-12. Rear: 8-16 |
Lawn/turf front | 20.5x8.00-10 |
Lawn/turf rear | 29x12.00-15 |
Dimensions | |
|---|---|
Wheelbase | 50.8 inches
129 cm |
Length | 82.7 inches
210 cm |
Width | 40.8 inches
103 cm |
Height (steering wheel) | 47.2 inches
119 cm |
Operating weight | 1473 lbs
668 kg |
Clearance (front axle) | 9.7 inches
24 cm |
Front tread | 34.8 inches
88 cm |
Rear tread | 32.9/38 inches
83/96 cm |
Photos
Hinomoto C144
Recommended Implements & Sizing Guide
Engineering recommendations for Hinomoto C144 based on its 17 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Hinomoto C144.
Estimated Continuous Field Runtime: 4.2 hrs
Approximately 4.2 hours of continuous field operation at ~75% rated power on a full tank (3.7 gal / 14 L).
Estimated 75% Load Fuel Burn~0.9 gal/hr (3.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Hinomoto C144 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Hinomoto C144.
Converted Equivalents:
Horsepower (HP)17 hp
Kilowatts (kW)12.7 kW
Metric Horsepower (PS / CV)17.2 PS
Direct Competitor Comparison
Compare Hinomoto C144 against same-era industry alternatives in the same horsepower class.
Current Model
Hinomoto
Hinomoto C144
Engine Power:Diesel (gross): 17 hp / 12.7 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 154 Lo-Boy
Engine Power:15.6
Production Years:1968 - 1974
Related models
Hinomoto E14
- Power:
- 13.8
- Production years:
- 1977 - 1979
Hinomoto MB-140
- Power:
- 14
- Production years:
- 1968 - 1972
Hinomoto E150
- Power:
- 15
- Production years:
- 1979 - 1982
Hinomoto E15
- Power:
- 15.8
- Production years:
- 1977 - 1979
Hinomoto E152
- Power:
- 15.8
- Production years:
- 1979 - 1982