Hinomoto NX260
The Hinomoto NX260 is a tractor produced by Hinomoto. It is equipped with a 91.5 ci 1.5 L engine. The listed engine power is Diesel (listed): 25.6 hp / 19.1 kW. Transmission: 16 forward and reverse. Operating weight: 2601 to 2888 pounds.
Engine Power
Diesel (listed): 25.6 hp / 19.1 kW
Fuel & Capacities
7.1 gal
26.9 L
Transmission
16 forward and reverse
Operating Weight
2601 to 2888 pounds
Overview
 | 1993 - 1995
NX SeriesCompact Utility tractorKubota built
NX Series
Compact Utility tractor
Kubota built |
|---|
Series map: NX240NX26017.7kw19.1kw
Note: the Hinomoto model NX260 is the same as the Kubota GL260. The following data is from the GL260 listing. |
Production | |
|---|---|
Distributor | Hinomoto |
Manufacturer | Kubota |
Compact Utility tractor | |
Hinomoto NX260 Engine | |
|---|---|
Kubota 1.5L 3-cyl diesel | |
Fuel tank | 7.1 gal
26.9 L |
Engine details ...  | |
Hinomoto NX260 Power | |
|---|---|
Engine | 25.6 hp
19.1 kW |
PTO (claimed) | 24 hp
17.9 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Mechanical wet disc brakes | |
Two-post ROPS. Cab optional. |
Hydraulics | |
|---|---|
Pump flow | 5.6 gpm
21.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift | 2061 lbs
934 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 568/803/985/1304 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 64.8 inches
164 cm |
Weight | 2601 to 2888 pounds |
Front tire | 7-16 |
Rear tire | 11.2-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Series map: NX240NX26017.7kw19.1kw
Note: the Hinomoto model NX260 is the same as the Kubota GL260. The following data is from the GL260 listing. |
Engine Detail — 91.5 ci / 1.5 L Diesel
Manufacturer | Kubota D1503 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.5 ci
1.5 L |
Bore/Stroke | 3.268x3.638 inches
83 x 92 mm |
Power | 25.6 hp
19.1 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Series map: NX240NX26017.7kw19.1kw
Note: the Hinomoto model NX260 is the same as the Kubota GL260. The following data is from the GL260 listing. |
Transmission options | |
|---|---|
16-speed gear | |
16-speed power shift |
Transmission — 16 forward and reverse gear
Type | gear |
Gears | 16 forward and reverse |
Clutch | dry disc |
Four gears (1-4) in two ranges (low/high) with additional creeper range and shuttle shift. | |
 | |
Transmission — 16 forward and reverse power shift
Type | power shift |
Gears | 16 forward and reverse |
Dimensions
Series map: NX240NX26017.7kw19.1kw
Note: the Hinomoto model NX260 is the same as the Kubota GL260. The following data is from the GL260 listing. |
Hinomoto NX260 Tires | |
|---|---|
Standard tires (ag) | Front: 7-16. Rear: 11.2-24 |
Dimensions | |
|---|---|
Wheelbase | 64.8 inches
164 cm |
Length | 120.1 inches
305 cm |
Width | 53.2 inches
135 cm |
Height (ROPS) | 76.8 inches
195 cm |
Height (cab) | 78.5 inches
199 cm |
ROPS Weight | 2601 lbs
1179 kg |
Cab Weight | 2888 lbs
1309 kg |
Ground clearance | 13.6 inches
34 cm |
Front tread | 42.5 inches
107 cm |
Rear tread | 41.3 to 53 inches
104 to 134 cm |
Photos
Hinomoto NX260 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Hinomoto NX260 based on its 25.6 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Hinomoto NX260.
Estimated Continuous Field Runtime: 5.3 hrs
Approximately 5.3 hours of continuous field operation at ~75% rated power on a full tank (7.1 gal / 26.9 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Hinomoto NX260 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Hinomoto NX260.
Converted Equivalents:
Horsepower (HP)25.6 hp
Kilowatts (kW)19.1 kW
Metric Horsepower (PS / CV)26 PS
Direct Competitor Comparison
Compare Hinomoto NX260 against same-era industry alternatives in the same horsepower class.
Current Model
Hinomoto
Hinomoto NX260
Engine Power:Diesel (listed): 25.6 hp / 19.1 kW
★ Baseline Reference
Related models
Hinomoto E21
- Power:
- 21
- Production years:
- 1977 - 1979
Hinomoto E222
- Power:
- 21.7
- Production years:
- 1979 - 1982
Hinomoto E224
- Power:
- 21.7
- Production years:
- 1979 - 1982
Hinomoto NX220
- Power:
- 21.7
- Production years:
- 1993 - 1995
Hinomoto E2202
- Power:
- 22
- Production years:
- 1982 - 1992