Holder Cultitrac A12

The Holder Cultitrac A12 is a tractor produced by Holder. It is equipped with a 36.9 ci 0.6 L engine. The listed engine power is Diesel (listed): 12 hp / 8.9 kW. Transmission: 6 forward and 3 reverse. Operating weight: 1500 lbs 680 kg.

Engine Power

Diesel (listed): 12 hp / 8.9 kW

Fuel & Capacities

2.5 gal 9.5 L

Transmission

6 forward and 3 reverse

Operating Weight

1500 lbs 680 kg

Overview

	1956 - ????	1956 - ????

1956 - ????

Production
Manufacturer	Holder

Holder A12 Engine
Sachs 0.6L 1-cyl diesel
Engine details ...

Holder A12 Transmission
6-speed
Transmission details ...

Holder A12 Power
Engine	12 hp 8.9 kW

Mechanical
Four-wheel drive
Drum brakes
Open operator station.

Capacity
Fuel	2.5 gal 9.5 L
Hydraulic system	1 gal 3.8 L

Hydraulics
Type	open center
Capacity	1 gal 3.8 L
Pressure	1850 psi 127.6 bar
Pump flow	2.6 gpm 9.8 lpm

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/920

Dimensions & Tires
Wheelbase	45 inches 114 cm
Weight	1500 lbs 680 kg
Front tire	5.00x16
Rear tire	5.00x16
Full dimensions and tires ...

Belt Pulley
Diameter	8.25 inches 20 cm
Width	4.75 inches 12 cm
RPM	1550

Engine

	1956 - ????	1956 - ????

1956 - ????

Engine Detail — 36.9 ci / 0.6 L Diesel

Manufacturer	Sachs D600L
Fuel Type	Diesel
Configuration	1-cylinder, air-cooled
Two-stroke engine.
Displacement	36.9 ci 0.6 L
Bore/Stroke	3.465x3.937 inches 88 x 100 mm
Power	12 hp 8.9 kW
Fuel system	direct injection
Air cleaner	oil bath
Compression	20:1
Rated RPM	2200
Starter volts	12

Transmission

	1956 - ????	1956 - ????

1956 - ????

Transmission — 6 forward and 3 reverse

Gears	6 forward and 3 reverse
Clutch	dry disc
With 5.00x16 tires.

Dimensions

	1956 - ????	1956 - ????

1956 - ????

Holder A12 Tires
Ag front	5.00x16
Ag rear	5.00x16
Ag front	5.50x16
Ag rear	5.50x16

Dimensions
Wheelbase	45 inches 114 cm
Length	80 inches 203 cm
Width	30 inches 76 cm
Height (steering wheel)	44 inches 111 cm
Weight	1500 lbs 680 kg
Ground clearance	9.5 inches 24 cm

Photos

Holder Cultitrac A12

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Holder Cultitrac A12.

Estimated Continuous Field Runtime: 4 hrs

Approximately 4 hours of continuous field operation at ~75% rated power on a full tank (2.5 gal / 9.5 L).

Estimated 75% Load Fuel Burn~0.6 gal/hr (2.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours