Holder A5.58
The Holder A5.58 is a tractor produced by Holder. It is equipped with a 125.1 ci 2.1 L engine. The listed engine power is Diesel (listed): 60 hp / 44.7 kW. Transmission: 12 forward and reverse. Operating weight: 2750 lbs 1247 kg.
Engine Power
Diesel (listed): 60 hp / 44.7 kW
Fuel & Capacities
13.5 gal
51.1 L
Transmission
12 forward and reverse
Operating Weight
2750 lbs
1247 kg
Overview
 | 2002 - 2009
Four-wheel Drive (4WD) tractor |
|---|
Production | |
|---|---|
Manufacturer | Holder |
Four-wheel Drive (4WD) tractor | |
Holder A5.58 Engine | |
|---|---|
Deutz 2.1L 3-cyl diesel | |
Engine details ...  |
Holder A5.58 Transmission | |
|---|---|
12-speed synchronized | |
Transmission details ...  |
Holder A5.58 Power | |
|---|---|
Engine | 60 hp
44.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic front and rear |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
Cab standard | |
Capacity | |
|---|---|
Fuel | 13.5 gal
51.1 L |
Hydraulic system | 4.75 gal
18.0 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 4.75 gal
18.0 L |
Pressure | 2205 psi
152.0 bar |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/750 |
Engine RPM | 540@2260 |
750@2260 | |
Front PTO | independent |
Front PTO Type | 1000 |
540 (optional) | |
Engine RPM | 1000@2390 |
Dimensions & Tires | |
|---|---|
Weight | 2750 lbs
1247 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 125.1 ci / 2.1 L Diesel
Manufacturer | Deutz 1011 |
Configuration | turbocharged diesel, 3-cylinder, air-cooled |
Displacement | 125.1 ci
2.1 L |
Bore/Stroke | 3.583x4.134 inches
91 x 105 mm |
Power | 60 hp
44.7 kW |
Fuel system | direct injection |
Air cleaner | dry |
Rated RPM | 2500 |
Starter volts | 12 |
Transmission
Transmission — 12 forward and reverse synchronized
Type | synchronized |
Gears | 12 forward and reverse |
Dimensions
Holder A5.58 Tires |
|---|
Dimensions |
|---|
Holder A5.58 Weight | |
|---|---|
Operating | 2750 lbs
1247 kg |
Max capacity | 5952 lbs
2699 kg |
Max front axle | 3527 lbs
1599 kg |
Max rear axle | 3527 lbs
1599 kg |
Photos
Holder A5.58 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Holder A5.58 based on its 60 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Holder A5.58.
Estimated Continuous Field Runtime: 4.3 hrs
Approximately 4.3 hours of continuous field operation at ~75% rated power on a full tank (13.5 gal / 51.1 L).
Estimated 75% Load Fuel Burn~3.1 gal/hr (11.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Holder A5.58 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Holder A5.58.
Converted Equivalents:
Horsepower (HP)60 hp
Kilowatts (kW)44.7 kW
Metric Horsepower (PS / CV)60.8 PS
Direct Competitor Comparison
Compare Holder A5.58 against same-era industry alternatives in the same horsepower class.
Current Model
Holder
Holder A5.58
Engine Power:Diesel (listed): 60 hp / 44.7 kW
★ Baseline Reference
Related models
Holder A62
- Power:
- 49
Holder A65
- Power:
- 58
Holder A760
- Power:
- 60
- Production years:
- 1994 - 2000
Holder A12
- Power:
- 12
- Production years:
- 1956 - 1966
Holder A15
- Power:
- 12