Hurlimann 910.6 XT

The Hurlimann 910.6 XT is a tractor produced by Hurlimann. It is equipped with a 366.12 ci 6.0 L engine. The listed engine power is Diesel (listed): 105 hp / 78.3 kW. Transmission: 60 forward and reverse. Drive type: 4x2 2WD. Operating weight: 9,459 lbs 4290 kg.

Engine Power

Diesel (listed): 105 hp / 78.3 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

44.9 gal 169.9 L

Transmission

60 forward and reverse

Operating Weight

9,459 lbs 4290 kg

Overview

	1995 - 2004

Production
Manufacturer	Hurlimann

Hurlimann 910.6 XT Engine
SAME 6.0L 6-cyl diesel
Fuel tank	44.9 gal 169.9 L
Engine details ...

Hurlimann 910.6 XT Power
Engine	105 hp 78.3 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD optional
Steering	hydrostatic power

Hydraulics
Pump flow	15.3 gpm 57.9 lpm

Tractor hitch
Rear lift	9922 lbs 4500 kg

Power Take-off (PTO)
Rear PTO Type	540, 750, 1000, 1250

Dimensions & Tires
Wheelbase	103.9 inches 263 cm
Weight	9,459 lbs 4290 kg
Front tire	380/70R28
Rear tire	480/70R38
Full dimensions and tires ...

Engine

Engine Detail — 366.12 ci / 6.0 L Diesel

Manufacturer	SAME
Fuel Type	Diesel
Configuration	6-cylinder
Displacement	366.12 ci 6.0 L
Bore/Stroke	4.1338x4.5472 inches 105 x 115 mm
Power	105 hp 78.3 kW
Rated RPM	2500
Torque	291.4 lb-ft 395.1 Nm
Torque RPM	1400

Transmission

Transmission options
20-speed
60-speed

Transmission — 20 forward and reverse

Gears

20 forward and reverse

Transmission — 60 forward and reverse

Gears

60 forward and reverse

Dimensions

Hurlimann 910.6 XT Tires
Ag front	380/70R28
Ag rear	480/70R38

Dimensions
Wheelbase	103.9 inches 263 cm
Length	173.6 inches 440 cm
Height	106.7 inches 271 cm
Weight	9,459 lbs 4290 kg

Photos

Hurlimann 910.6 XT tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Hurlimann 910.6 XT based on its 105 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hurlimann 910.6 XT.

Estimated Continuous Field Runtime: 8.2 hrs

Approximately 8.2 hours of continuous field operation at ~75% rated power on a full tank (44.9 gal / 170 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours