Hurlimann H-1350 SX

The Hurlimann H-1350 SX is a tractor produced by Hurlimann. It is equipped with a 366.12 ci 6.0 L engine. The listed engine power is Diesel (listed): 135 hp / 100.7 kW. Transmission: 18 forward and reverse. Drive type: 4x2 2WD. Operating weight: 13,450 lbs 6100 kg.

Engine Power

Diesel (listed): 135 hp / 100.7 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

100.4 gal 380.0 L

Transmission

18 forward and reverse

Operating Weight

13,450 lbs 6100 kg

Overview

	1998 - 2004

Production
Manufacturer	Hurlimann

Hurlimann H-1350 SX Engine
SAME 6.0L 6-cyl diesel
Fuel tank	100.4 gal 380.0 L
Engine details ...

Hurlimann H-1350 SX Transmission
18-speed
Transmission details ...

Hurlimann H-1350 SX Power
Engine	135 hp 100.7 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD optional
Steering	hydrostatic power

Hydraulics
Pump flow	27.2 gpm 103.0 lpm

Tractor hitch
Rear lift	18963 lbs 8601 kg

Power Take-off (PTO)
Rear PTO Type	540, 1000

Dimensions & Tires
Wheelbase	108.3 inches 275 cm
Weight	13,450 lbs 6100 kg
Front tire	480/70R30
Rear tire	580/70R38
Full dimensions and tires ...

Engine

Engine Detail — 366.12 ci / 6.0 L Diesel

Manufacturer	SAME
Fuel Type	Diesel
Configuration	6-cylinder
Displacement	366.12 ci 6.0 L
Bore/Stroke	4.1338x4.5472 inches 105 x 115 mm
Power	135 hp 100.7 kW
Rated RPM	2350
Torque	433.0 lb-ft 587.1 Nm
Torque RPM	1450

Transmission

Transmission — 18 forward and reverse

Gears

18 forward and reverse

Dimensions

Hurlimann H-1350 SX Tires
Ag front	480/70R30
Ag rear	580/70R38

Dimensions
Wheelbase	108.3 inches 275 cm
Length	183.9 inches 467 cm
Height	113.4 inches 288 cm
Weight	13,450 lbs 6100 kg

Photos

Hurlimann H-1350 SX tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Hurlimann H-1350 SX based on its 135 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hurlimann H-1350 SX.

Estimated Continuous Field Runtime: 14.3 hrs

Approximately 14.3 hours of continuous field operation at ~75% rated power on a full tank (100.4 gal / 380.1 L).

Estimated 75% Load Fuel Burn~7 gal/hr (26.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours