Hurlimann H-6115 Elite

The Hurlimann H-6115 Elite is a tractor produced by Hurlimann. It is equipped with a 366.1 ci 6.0 L engine. The listed engine power is Diesel (listed): 115 hp / 85.8 kW. Transmission: 48 forward and reverse. Operating weight: 10318 lbs 4680 kg.

Engine Power

Diesel (listed): 115 hp / 85.8 kW

Fuel & Capacities

60.8 gal 230.1 L

Transmission

48 forward and reverse

Operating Weight

10318 lbs 4680 kg

Overview

	1991 - 1996 Elite Series

Production
Manufacturer	Hurlimann

Hurlimann H-6115 Elite Engine
SAME 6.0L 6-cyl diesel
Fuel tank	60.8 gal 230.1 L
Engine details ...

Hurlimann H-6115 Elite Power
Engine	115 hp 85.8 kW

Mechanical
Two- or four-wheel drive
Power steering
Cab standard with available air-conditioning.

Hydraulics
Pump flow	15.2 gpm 57.5 lpm

Tractor hitch
Rear lift	13671 lbs 6201 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/1000/ground

Dimensions & Tires
Wheelbase	108.3 inches 275 cm
Weight	10318 lbs 4680 kg
Front tire	16.9x30
Rear tire	18.4x38
Full dimensions and tires ...

References

Elite published in 1994, by Hurlimann

Engine

Engine Detail — 366.1 ci / 6.0 L Diesel

Manufacturer	SAME 1000.6 W
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled
Displacement	366.1 ci 6.0 L
Bore/Stroke	4.1338x4.5472 inches 105 x 115 mm
Power	115 hp 85.8 kW
Rated RPM	2500
Torque	291.4 lb-ft 395.1 Nm
Torque RPM	1300

Transmission

Transmission options
36-speed synchronized
48-speed creeper

Transmission — 36 forward and reverse synchronized

Type	synchronized
Gears	36 forward and reverse
Clutch	electro-hydraulic wet disc
Six gears in six ranges with shuttle.
Transmission
Type	creeper
Gears	48 forward and reverse

Dimensions

Hurlimann H-6115 Elite Tires
Standard tires (ag)	Front: 16.9x30. Rear: 18.4x38
Optional tires (ag)	Front: 480/70-28. Rear: 520/70-38
	Front: 14.9x28. Rear: 16.9x38

Dimensions
Wheelbase	108.3 inches 275 cm
Length	180.7 inches 458 cm
Width	87.4 inches*Minimum width. 221 cm
Height	110.4 inches 280 cm
Height (hood)	73.8 inches 187 cm
Weight	10318 lbs 4680 kg
Ground clearance	17.7 inches 44 cm
Front tread	70.9 to 81.1 inches 180 to 205 cm
Rear tread	68.9 to 88.6 inches 175 to 225 cm

Photos

Hurlimann H-6115 Elite tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Hurlimann H-6115 Elite based on its 115 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hurlimann H-6115 Elite.

Estimated Continuous Field Runtime: 10.2 hrs

Approximately 10.2 hours of continuous field operation at ~75% rated power on a full tank (60.8 gal / 230.2 L).

Estimated 75% Load Fuel Burn~6 gal/hr (22.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours