Hurlimann Prince 40

The Hurlimann Prince 40 is a tractor produced by Hurlimann. The listed engine power is Diesel (listed): 40 hp / 29.8 kW.

Engine Power

Diesel (listed): 40 hp / 29.8 kW

Fuel & Capacities

Diesel

Overview

	2004 - 2006 Prince SeriesCompact Utility tractor Prince Series Compact Utility tractor

Production
Manufacturer	Hurlimann (a part of SAME)
Compact Utility tractor

Hurlimann Prince 40 Engine
Mitsubishi 4-cyl diesel
Engine details ...

Hurlimann Prince 40 Power
Engine	40 hp 29.8 kW

Mechanical
Two- or four-wheel drive
Two-post ROPS.

Dimensions & Tires
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — Diesel

Manufacturer	Mitsubishi
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Power	40 hp 29.8 kW
Starter	electric
Starter volts	12

Transmission

Transmission

Dimensions

Hurlimann Prince 40 Tires

Dimensions

Recommended Implements & Sizing Guide

Engineering recommendations for Hurlimann Prince 40 based on its 40 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hurlimann Prince 40.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours