IMT 2065
The IMT 2065 is a tractor produced by Imt. It is equipped with a 152.6 ci 2.5 L engine. The listed engine power is Diesel (gross): 62.4 hp / 46.5 kW. Transmission: 10 forward and 2 reverse. Operating weight: 6129 lbs 2780 kg.
Engine Power
Diesel (gross): 62.4 hp / 46.5 kW
Fuel & Capacities
15.85 gal
60.0 L
Transmission
10 forward and 2 reverse
Operating Weight
6129 lbs
2780 kg
Overview
 | 2012 - 2015
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | IMT |
Utility tractor | |
IMT 2065 Engine | |
|---|---|
IMR 2.5L 3-cyl diesel | |
Fuel tank | 15.85 gal
60.0 L |
Engine details ...  | |
IMT 2065 Transmission | |
|---|---|
10-speed synchromesh | |
Transmission details ...  |
IMT 2065 Power | |
|---|---|
Engine (gross) | 62.4 hp
46.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Wet disc brakes | |
Cab standard. | |
Tractor hitch | |
|---|---|
Rear lift | 4339 lbs
1968 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/1000 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 77.2 inches
196 cm |
Weight | 6129 lbs
2780 kg |
Front tire | 7.50-20 |
Rear tire | 13.6-28 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
Tractor IMT-2065 |
Engine
Engine Detail — 152.6 ci / 2.5 L Diesel
Manufacturer | IMR DM34/T |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 152.6 ci
2.5 L |
Bore/Stroke | 3.60x5.00 inches
91 x 127 mm |
Rated Power (gross) | 62.4 hp
46.5 kW |
Fuel system | direct injection |
Compression | 17.4:1 |
Rated RPM | 2250 |
Firing order | 1-2-3 |
Transmission
Transmission — 10 forward and 2 reverse synchromesh
Type | synchromesh |
Gears | 10 forward and 2 reverse |
Clutch | dry disc |
Dimensions
IMT 2065 Tires | |
|---|---|
Ag front | 7.50-20 |
Ag rear | 13.6-28 |
Dimensions | |
|---|---|
Wheelbase | 77.2 inches
196 cm |
Length | 129.1 inches
327 cm |
Width | 65.6 inches
166 cm |
Height | 90.9 inches
230 cm |
Weight | 6129 lbs
2780 kg |
Ground clearance | 11.4 inches
28 cm |
Front tread | 51.2 to 74.8 inches
130 to 189 cm |
Rear tread | 51.2 to 74.8 inches
130 to 189 cm |
Photos
IMT 2065 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Imt 2065 based on its 62.4 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Imt 2065.
Estimated Continuous Field Runtime: 4.9 hrs
Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (15.8 gal / 60 L).
Estimated 75% Load Fuel Burn~3.2 gal/hr (12.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Imt 2065 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Imt 2065.
Converted Equivalents:
Horsepower (HP)62.4 hp
Kilowatts (kW)46.5 kW
Metric Horsepower (PS / CV)63.3 PS
Direct Competitor Comparison
Compare IMT 2065 against same-era industry alternatives in the same horsepower class.
Current Model
Imt
IMT 2065
Engine Power:Diesel (gross): 62.4 hp / 46.5 kW
★ Baseline Reference