IMT 555
The IMT 555 is a tractor produced by Imt. It is equipped with a 203.2 ci 3.3 L engine. The listed engine power is Diesel (listed): 50 hp / 37.3 kW. Transmission: 6 forward and 2 reverse. Operating weight: 4200 lbs 1905 kg.
Engine Power
Diesel (listed): 50 hp / 37.3 kW
Fuel & Capacities
11.9 gal
45.0 L
Transmission
6 forward and 2 reverse
Operating Weight
4200 lbs
1905 kg
Overview
 | 1964 - 1971
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | IMT |
Utility tractor | |
Built in Belgrade, Yugoslavia | |
IMT 555 Engine | |
|---|---|
IMT 3.3L 4-cyl diesel | |
Fuel tank | 11.9 gal
45.0 L |
14.5 galOptOptional
54.9 L | |
Engine details ...  | |
IMT 555 Transmission | |
|---|---|
6-speed gear | |
Transmission details ...  |
IMT 555 Power | |
|---|---|
Engine | 50 hp
37.3 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Manual steering | |
Open operator station. |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at ends) | 1801 lbs
816 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 540@1500 |
Dimensions & Tires | |
|---|---|
Wheelbase | 84.8 inches
215 cm |
Weight | 4200 lbs
1905 kg |
Full dimensions and tires ...  | |
Engine
Engine Detail — 203.2 ci / 3.3 L Diesel
Manufacturer | IMT IM-034 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 203.2 ci
3.3 L |
Bore/Stroke | 3.60x5.00 inches
91 x 127 mm |
Power | 50 hp
37.3 kW |
Compression | 17.4:1 |
Rated RPM | 2000 |
Torque | 141 lb-ft
191.2 Nm |
Torque RPM | 1300 |
Firing order | 1-3-4-2 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 6.9 qts
6.5 L |
Coolant capacity | 12.7 qts
12.0 L |
Transmission
Transmission — 6 forward and 2 reverse gear
Type | gear |
Gears | 6 forward and 2 reverse |
 | |
Dimensions
IMT 555 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 84.8 inches
215 cm |
Length | 137.2 inches
348 cm |
Width | 66.9 inches
169 cm |
Height (steering wheel) | 66.5 inches
168 cm |
Height (exhaust) | 88.6 inches
225 cm |
Weight | 4200 lbs
1905 kg |
Clearance (front axle) | 23.9 inches
60 cm |
Clearance (rear axle) | 24.6 inches
62 cm |
Front tread | 51.6 to 81.1 inches
131 to 205 cm |
Rear tread | 52.8 to 85.4 inches
134 to 216 cm |
Photos
IMT 555 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Imt 555 based on its 50 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Imt 555.
Estimated Continuous Field Runtime: 4.6 hrs
Approximately 4.6 hours of continuous field operation at ~75% rated power on a full tank (11.9 gal / 45 L).
Estimated 75% Load Fuel Burn~2.6 gal/hr (9.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Imt 555 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Imt 555.
Converted Equivalents:
Horsepower (HP)50 hp
Kilowatts (kW)37.3 kW
Metric Horsepower (PS / CV)50.7 PS
Direct Competitor Comparison
Compare IMT 555 against same-era industry alternatives in the same horsepower class.
Current Model
Imt
IMT 555
Engine Power:Diesel (listed): 50 hp / 37.3 kW
★ Baseline Reference