IMT 5130
The IMT 5130 is a tractor produced by Imt. It is equipped with a 353.7 ci 5.8 L engine. The listed engine power is Diesel (listed): 135 hp / 100.7 kW. Transmission: 10 forward and 2 reverse. Operating weight: 13318 lbs 6041 kg.
Engine Power
Diesel (listed): 135 hp / 100.7 kW
Fuel & Capacities
68.7 gal
260.0 L
Transmission
10 forward and 2 reverse
Operating Weight
13318 lbs
6041 kg
Overview
 | 1982 - ???? | 1982 - ???? |
|---|
1982 - ???? |
|---|
Production | |
|---|---|
Manufacturer | IMT |
Built in Belgrade, Yugoslavia | |
Variants | |
|---|---|
5130 | 2WD |
5136 | 4WD |
IMT 5130 Engine | |
|---|---|
IMR 5.8L 6-cyl diesel | |
Fuel tank | 68.7 gal
260.0 L |
Engine details ...  | |
IMT 5130 Transmission | |
|---|---|
10-speed gear | |
Transmission details ...  |
IMT 5130 Power | |
|---|---|
Engine | 135 hp
100.7 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Power steering | |
Disc brakes | |
Cab standard. |
Hydraulics | |
|---|---|
Total flow | 9.3 gpm
35.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 7717.5 lbs
3500 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 108.3 inches
275 cm |
Weight | 13318 lbs
6041 kg |
Front tire | 11.00-16 |
Rear tire | 18.4-38 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
Traktori 5100 5106 5130 5136 (019645) |
Engine
| 1982 - ???? | 1982 - ???? |
|---|
1982 - ???? |
|---|
Engine Detail — 353.7 ci / 5.8 L Diesel
Manufacturer | IMR TS 46/T |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 353.7 ci
5.8 L |
Bore/Stroke | 3.87x5.00 inches
98 x 127 mm |
Power | 135 hp
100.7 kW |
Compression | 16:1 |
Rated RPM | 2250 |
Firing order | 1-5-3-6-2-4 |
Transmission
| 1982 - ???? | 1982 - ???? |
|---|
1982 - ???? |
|---|
Transmission — 10 forward and 2 reverse gear
Type | gear |
Gears | 10 forward and 2 reverse |
 | |
Dimensions
| 1982 - ???? | 1982 - ???? |
|---|
1982 - ???? |
|---|
IMT 5130 Tires | |
|---|---|
Ag front | 11.00-16 |
Ag rear | 18.4-38 |
Dimensions | |
|---|---|
Wheelbase | 108.3 inches
275 cm |
Length | 190.2 inches
483 cm |
Width | 86.7 inches
220 cm |
Height (cab) | 111.0 inches
281 cm |
Height (exhaust) | 112.6 inches
286 cm |
Weight | 13318 lbs
6041 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for Imt 5130 based on its 135 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Imt 5130.
Estimated Continuous Field Runtime: 9.8 hrs
Approximately 9.8 hours of continuous field operation at ~75% rated power on a full tank (68.7 gal / 260.1 L).
Estimated 75% Load Fuel Burn~7 gal/hr (26.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Imt 5130 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Imt 5130.
Converted Equivalents:
Horsepower (HP)135 hp
Kilowatts (kW)100.7 kW
Metric Horsepower (PS / CV)136.9 PS
Direct Competitor Comparison
Compare IMT 5130 against same-era industry alternatives in the same horsepower class.
Current Model
Imt
IMT 5130
Engine Power:Diesel (listed): 135 hp / 100.7 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 1246
Engine Power:122
Production Years:1972 - 1980