IMT 5133
The IMT 5133 is a tractor produced by Imt. It is equipped with a 353.7 ci 5.8 L engine. The listed engine power is Diesel (listed): 133 hp / 99.2 kW. Transmission: synchro. Operating weight: 13,285 lbs 6026 kg.
Engine Power
Diesel (listed): 133 hp / 99.2 kW
Fuel & Capacities
68.7 gal
260.0 L
Transmission
synchro
Operating Weight
13,285 lbs
6026 kg
Overview
 |
|---|
Production | |
|---|---|
Manufacturer | IMT |
IMT 5133 Engine | |
|---|---|
5.8L 6-cyl diesel | |
Fuel tank | 68.7 gal
260.0 L |
Engine details ...  | |
IMT 5133 Transmission | |
|---|---|
10-speed | |
Transmission details ...  |
IMT 5133 Power | |
|---|---|
Engine | 133 hp
99.2 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Disc brakes | |
Hydraulics | |
|---|---|
Total flow | 9.3 gpm
35.2 lpm |
Tractor hitch | |
|---|---|
Rear lift | 8379 lbs
3800 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Weight | 13,285 lbs
6026 kg |
Front tire | 12.4-24 |
Rear tire | 2x9.5-48 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 353.7 ci / 5.8 L Diesel
Manufacturer | TS 46/T |
Configuration | turbo diesel, 6-cylinder |
Displacement | 353.7 ci
5.8 L |
Bore/Stroke | 3.87x5.00 inches
98 x 127 mm |
Power | 133 hp
99.2 kW |
Rated RPM | 2250 |
Transmission
Transmission — synchro
Transmission | synchro |
Gears | 10 forward and 2 reverse |
Dimensions
IMT 5133 Tires | |
|---|---|
Ag front | 12.4-24 |
Ag rear | 2x9.5-48 |
Dimensions | |
|---|---|
Length | 216.5 inches
549 cm |
Height | 111.0 inches
281 cm |
Weight | 13,285 lbs
6026 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for Imt 5133 based on its 133 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Imt 5133.
Estimated Continuous Field Runtime: 9.9 hrs
Approximately 9.9 hours of continuous field operation at ~75% rated power on a full tank (68.7 gal / 260.1 L).
Estimated 75% Load Fuel Burn~6.9 gal/hr (26.2 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Imt 5133 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Imt 5133.
Converted Equivalents:
Horsepower (HP)133 hp
Kilowatts (kW)99.2 kW
Metric Horsepower (PS / CV)134.8 PS
Direct Competitor Comparison
Compare IMT 5133 against same-era industry alternatives in the same horsepower class.
Current Model
Imt
IMT 5133
Engine Power:Diesel (listed): 133 hp / 99.2 kW
★ Baseline Reference