International Harvester 483

The International Harvester 483 is a tractor produced by International Harvester. It is equipped with a 151.8 ci 2.5 L engine. The listed engine power is Diesel (listed): 46 hp / 34.3 kW. Transmission: 8 forward and 2 reverse. Operating weight: 3550 to 3991 pounds.

Engine Power
Diesel (listed): 46 hp / 34.3 kW
Fuel & Capacities
15.1 gal 57.2 L
Transmission
8 forward and 2 reverse
Operating Weight
3550 to 3991 pounds

Overview

International Harvester 483 tractor photo
1982 - 1984 Utility tractorKomatsu built Utility tractor Komatsu built
Production
Distributor
International Harvester
Manufacturer
Komatsu
Utility tractor
Built in Japan
Original price was $13,900 in 1984
International Harvester 483 Engine
Nissan 2.5L 4-cyl diesel
Engine details ...
International Harvester 483 Transmission
8-speed
Transmission details ...
International Harvester 483 Power
Engine
46 hp 34.3 kW
PTO (claimed)
42 hp 31.3 kW
Mechanical
Two- or four-wheel drive
Power steering
Hydraulic wet disc brakes
ROPS and canopy optional
Capacity
Fuel
15.1 gal 57.2 L
Hydraulic system
8.5 gal 32.2 L
Hydraulics
Capacity
8.5 gal 32.2 L
Pressure
2500 psi 172.4 bar
Total flow
6.4 gpm 24.2 lpm
Tractor hitch
Rear Type
I/II
Rear lift (at ends)
3307 lbs 1500 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540
Dimensions & Tires
Wheelbase
76.8 inches 195 cm
Weight
3550 to 3991 pounds
Front tire
6.00-16
2WD Rear tire
13.6/12-28
Full dimensions and tires ...
Electrical
Charging system
alternator
Charging amps
35
Battery volts
12
References
483 references literature
New International 483 Tractor published by International Harvester
New International Tractors 383 483 published in 1983, by International Harvester

Engine

Engine Detail — 151.8 ci / 2.5 L Diesel

Manufacturer
Nissan SD25
Fuel Type
Diesel
Configuration
4-cylinder, liquid-cooled
Displacement
151.8 ci 2.5 L
Bore/Stroke
3.50x3.94 inches 89 x 100 mm
Power
46 hp 34.3 kW
Rated RPM
2400
Torque
104.3 lb-ft 141.4 Nm
Starter volts
12
Oil capacity
6 qts 5.7 L
Coolant capacity
8.4 qts 7.9 L

Transmission

Transmission — 8 forward and 2 reverse

Gears
8 forward and 2 reverse
Oil capacity
34 qts 32.2 L
With 12.4/11-28 rear tires.
483   speeds

Dimensions

International Harvester 483 Tires
2WD Standard tires (ag)
Front: 6.00-16. Rear: 13.6/12-28
4WD Standard tires (ag)
Front: 8.3-20. Rear: 13.6/12-28
Dimensions
Wheelbase
76.8 inches 195 cm
Length
118.3 inches 300 cm
Width
65.2 inches 165 cm
Height (steering wheel)
61.4 inches 155 cm
Height (exhaust)
87.8 inches 223 cm
2WD Shipping weight
3550 lbs 1610 kg
4WD Shipping weight
3991 lbs 1810 kg
2WD Ground clearance
15.4 inches 39 cm
4WD Ground clearance
15.9 inches 40 cm
Front tread
48 to 75.7 inches 121 to 192 cm
Rear tread
47.6 to 76.1 inches 120 to 193 cm

Photos

International Harvester 483

International Harvester 483

International Harvester 483

International Harvester 483

International Harvester 483

International Harvester 483

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester 483 based on its 46 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)Medium DutyStandard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
Small Square Baler (14x18")小方捆打捆机 (36x46 cm)Medium DutyClassic 2-string baler for horse and small livestock hay.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester 483.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (15.1 gal / 57.2 L).

Estimated 75% Load Fuel Burn~2.4 gal/hr (9.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

International Harvester 483 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for International Harvester 483.

Converted Equivalents:

Horsepower (HP)46 hp
Kilowatts (kW)34.3 kW
Metric Horsepower (PS / CV)46.6 PS

Direct Competitor Comparison

Compare International Harvester 483 against same-era industry alternatives in the same horsepower class.

Current Model
International Harvester

International Harvester 483

Engine Power:Diesel (listed): 46 hp / 34.3 kW
★ Baseline Reference
DeereMarket Competitor

Deere 1445F

Engine Power:41.4
Production Years:1987 - 1990
KubotaMarket Competitor

Kubota GL417

Engine Power:41.4
Production Years:1996 - 2001
Massey FergusonMarket Competitor

Massey Ferguson 1742

Engine Power:41.6
Production Years:2013 - 2018
Deutz-FahrMarket Competitor

Deutz-Fahr Agrokid 45

Engine Power:41.6
Production Years:1997 - 2002