International Harvester A-696

The International Harvester A-696 is a tractor produced by International Harvester. It is equipped with a 310 ci 5.1 L engine. The listed engine power is Diesel (gross): 90 hp / 67.1 kW. Transmission: International Harvester.

Engine Power

Diesel (gross): 90 hp / 67.1 kW

Fuel & Capacities

Diesel

Transmission

International Harvester

Overview

	1972 - 1973 66A SeriesRow-Crop tractor 66A Series Row-Crop tractor

Production
Manufacturer	International Harvester
Row-Crop tractor
Built in Geelong, Australia

International Harvester A-696 Engine
International Harvester 5.1L 6-cyl diesel
Engine details ...

International Harvester A-696 Transmission
8-speed gear
Transmission details ...

International Harvester A-696 Power
Engine (gross)	90 hp 67.1 kW
Drawbar (claimed)	63 hp 47.0 kW
PTO (claimed)	70 hp 52.2 kW

Mechanical
Two-wheel drive
Final drives	spur gear
Power steering
Hydraulic disc brakes
Open operator station.

Hydraulics
Type	open center
Pump flow	12 gpm 45.4 lpm

Tractor hitch
Rear Type	II
Rear lift (at ends)	6800 lbs 3084 kg

Dimensions & Tires
Wheelbase	104.8 inches 266 cm
Front tire	7.50-20
Rear tire	18.4-34
Full dimensions and tires ...

Electrical
Ground	negative
Batteries	2
Battery volts	6

References

International Harvester Australia: Geelong Works by Sarah Tomac*
International Harvester Tractors & Equipment in Australia & New Zealand by Graeme Quick
696 & 766 Tractors published in 1972, by International Harvester
*Publication contains known errors.

Engine

Engine Detail — 310 ci / 5.1 L Diesel

Manufacturer	International Harvester D-310
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled inline
Displacement	310 ci 5.1 L
Bore/Stroke	3.875x4.375 inches 98 x 111 mm
Power (gross)	90 hp 67.1 kW
Fuel system	direct injection
Air cleaner	dual stage dry
Rated RPM	2300
Torque	227 lb-ft 307.8 Nm
Torque RPM	1600
Starter	electric
Starter volts	12

Transmission

Transmission — International Harvester

Transmission	International Harvester
Type	gear
Gears	8 forward and 4 reverse

Dimensions

International Harvester A-696 Tires
Ag front	7.50-20
Ag rear	18.4-34

Dimensions
Wheelbase	104.8 inches 266 cm
Length	155 inches 393 cm

Photos

International Harvester A-696

International 696 tractor.

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester A-696 based on its 90 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester A-696.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours