International Harvester D-436
The International Harvester D-436 is a tractor produced by International Harvester. It is equipped with a 148.5 ci 2.4 L engine. The listed engine power is Diesel (gross): 39 hp / 29.1 kW. Transmission: Agriomatic. Operating weight: 3142 lbs 1425 kg.
Engine Power
Diesel (gross): 39 hp / 29.1 kW
Fuel & Capacities
7.9 gal
29.9 L
Transmission
Agriomatic
Operating Weight
3142 lbs
1425 kg
Overview
 | 1959 - 1962
D SeriesUtility tractor
D Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | International Harvester |
Utility tractor | |
Built in Neuss, Germany | |
Total built | 7,243 |
International Harvester D-436 Engine | |
|---|---|
International Harvester 2.4L 4-cyl diesel | |
Fuel tank | 7.9 gal
29.9 L |
Engine details ...  | |
International Harvester D-436 Transmission | |
|---|---|
8-speed | |
Transmission details ...  |
International Harvester D-436 Power | |
|---|---|
Engine (gross) | 39 hp
29.1 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Differential lock | mechanical rear |
Open operator station. | |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 74 inches
187 cm |
Weight | 3142 lbs
1425 kg |
Front tire | 5.00-16 |
Rear tire | 10-28 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
D-436 Standard published by International Harvester | |
D-436 Standard published by International Harvester |
Engine
Engine Detail — 148.5 ci / 2.4 L Diesel
Manufacturer | International Harvester DD-148 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 148.5 ci
2.4 L |
Bore/Stroke | 3.437x4.00 inches
87 x 102 mm |
Power (gross) | 39 hp
29.1 kW |
Air cleaner | oil bath |
Compression | 19:1 |
Rated RPM | 1900 |
Torque | 108 lb-ft
146.4 Nm |
Starter volts | 12 |
Oil capacity | 6.3 qts
6.0 L |
Coolant capacity | 14.5 qts
13.7 L |
Transmission
Transmission — Agriomatic
Transmission | Agriomatic |
Gears | 8 forward and 2 reverse |
With 10-28 rear tires. | |
 | |
Dimensions
International Harvester D-436 Tires | |
|---|---|
Ag front | 5.00-16 |
Ag rear | 10-28 |
Ag front | 5.50-16 |
6.00-16 | |
4.00-19 | |
6.00-19 | |
Ag rear | 11-28 |
9-36 | |
11-36 | |
Dimensions | |
|---|---|
Wheelbase | 74 inches
187 cm |
Length | 115.25 inches
292 cm |
Width | 64.5 inches
163 cm |
Height | 61 inches
154 cm |
Weight | 3142 lbs
1425 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for International Harvester D-436 based on its 39 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester D-436.
Estimated Continuous Field Runtime: 3.9 hrs
Approximately 3.9 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).
Estimated 75% Load Fuel Burn~2 gal/hr (7.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
International Harvester D-436 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for International Harvester D-436.
Converted Equivalents:
Horsepower (HP)39 hp
Kilowatts (kW)29.1 kW
Metric Horsepower (PS / CV)39.5 PS
Direct Competitor Comparison
Compare International Harvester D-436 against same-era industry alternatives in the same horsepower class.
Current Model
International Harvester
International Harvester D-436
Engine Power:Diesel (gross): 39 hp / 29.1 kW
★ Baseline Reference
Related models
International Harvester D-432
- Power:
- 32
- Production years:
- 1962 - 1965
International Harvester 15-30
- Power:
- 33.3
- Production years:
- 1917 - 1921
International Harvester Mogul 15-30
- Power:
- 33.3
- Production years:
- 1913 - 1915
International Harvester TD-6
- Power:
- 34.4
- Production years:
- 1940 - 1969
International Harvester 354
- Power:
- 35
- Production years:
- 1971 - 1975