Iseki AT50
The Iseki AT50 is a tractor produced by Iseki. It is equipped with a 180.3 ci 3.0 L engine. The listed engine power is Diesel (listed): 49.4 hp / 36.8 kW. Transmission: 24 forward and reverse. Operating weight: 3814 to 4167 pounds.
Engine Power
Diesel (listed): 49.4 hp / 36.8 kW
Fuel & Capacities
13.2 gal
50.0 L
Transmission
24 forward and reverse
Operating Weight
3814 to 4167 pounds
Overview
![]() | 2004 - 2009
AT SeriesCompact Utility tractor
AT Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Iseki AT50 Engine | |
|---|---|
Iseki 3.0L 4-cyl diesel | |
Fuel tank | 13.2 gal
50.0 L |
Engine details ... | |
Iseki AT50 Transmission | |
|---|---|
24-speed | |
Transmission details ... |
Iseki AT50 Power | |
|---|---|
Engine | 49.4 hp
36.8 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Two-post ROPS. Cab optional. |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 586@2500 |
787@2500 | |
970@2500 | |
1263@2500 | |
-787@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 77.6 inches
197 cm |
Weight | 3814 to 4167 pounds |
Front tire | 8.3-20 |
Rear tire | 13.6-28 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
AT published in 2008, by Iseki |
Engine
Engine Detail — 180.3 ci / 3.0 L Diesel
Manufacturer | Iseki E4DE |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 180.3 ci
3.0 L |
Bore/Stroke | 3.82x3.94 inches
97 x 100 mm |
Power | 49.4 hp
36.8 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 24 forward and reverse
Gears | 24 forward and reverse |
Clutch | dry disc |
Dimensions
Iseki AT50 Tires | |
|---|---|
Standard tires (ag) | Front: 8.3-20. Rear: 13.6-28 |
Dimensions | |
|---|---|
Wheelbase | 77.6 inches
197 cm |
Length | 138.6 inches
352 cm |
Width | 61.4 inches
155 cm |
Height (ROPS) | 89.8 inches
228 cm |
Height (cab) | 100.6 inches
255 cm |
ROPS Weight | 3814 lbs
1730 kg |
Cab Weight | 4167 lbs
1890 kg |
Ground clearance | 15 inches
38 cm |
Front tread | 49.2 inches
124 cm |
Rear tread | 44.9 to 60.6 inches
114 to 153 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki AT50 based on its 49.4 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki AT50.
Estimated Continuous Field Runtime: 5.1 hrs
Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).
Estimated 75% Load Fuel Burn~2.6 gal/hr (9.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki AT50 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki AT50.
Converted Equivalents:
Horsepower (HP)49.4 hp
Kilowatts (kW)36.8 kW
Metric Horsepower (PS / CV)50.1 PS
Direct Competitor Comparison
Compare Iseki AT50 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki AT50
Engine Power:Diesel (listed): 49.4 hp / 36.8 kW
★ Baseline Reference
Related models
Iseki TA410
- Power:
- 40.4
- Production years:
- 1985 - 1987
Iseki TA415
- Power:
- 40.4
- Production years:
- 1987 - 1990
Iseki TA417
- Power:
- 40.4
- Production years:
- 1989 - 1992
Iseki TG413
- Power:
- 40.4
- Production years:
- 1994 - 2004
Iseki TK41
- Power:
- 40.4
- Production years:
- 1996 - 2001


