Iseki TA250

The Iseki TA250 is a tractor produced by Iseki. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (listed): 25 hp / 18.6 kW. Transmission: 16 forward and reverse. Operating weight: 2348 to 2557 pounds.

Engine Power
Diesel (listed): 25 hp / 18.6 kW
Fuel & Capacities
7.9 gal 29.9 L
Transmission
16 forward and reverse
Operating Weight
2348 to 2557 pounds

Overview

Iseki TA250 tractor photo
1985 - 1987 Landleader TA0 SeriesCompact Utility tractor Landleader TA0 Series Compact Utility tractor
Production
Manufacturer
Iseki
Compact Utility tractor
Variants
TA250F
4WD
Iseki TA250 Engine
Isuzu 1.5L 3-cyl diesel
Fuel tank
7.9 gal 29.9 L
Engine details ...
Iseki TA250 Transmission
16-speed
Transmission details ...
Iseki TA250 Power
Engine
25 hp 18.6 kW
Mechanical
Two- or four-wheel drive
Open operator station.
Tractor hitch
Rear Type
JIS1
Power Take-off (PTO)
Rear PTO Type
540 (1.375)
Engine RPM
565@2500
733@2500
898@2500
1244@2500
Dimensions & Tires
Wheelbase
63.6 inches 161 cm
Weight
2348 to 2557 pounds
Front tire
5.00-15
2WD Rear tire
11.2-24
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
TA250 references literature
Landleader published in 1987, by Iseki

Engine

Engine Detail — 91.4 ci / 1.5 L Diesel

Manufacturer
Isuzu E3AD1
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled
Displacement
91.4 ci 1.5 L
Bore/Stroke
3.385x3.385 inches 86 x 86 mm
Power
25 hp 18.6 kW
Rated RPM
2500
Starter
electric
Starter volts
12

Transmission

Transmission — 16 forward and reverse

Gears
16 forward and reverse
TA250   speeds

Dimensions

Iseki TA250 Tires
2WD Standard tires (ag)
Front: 5.00-15. Rear: 11.2-24
4WD Standard tires (ag)
Front: 7-16. Rear: 11.2-24
Dimensions
Wheelbase
63.6 inches 161 cm
Length
117.3 inches 297 cm
Width
52 inches 132 cm
Height (exhaust)
76 inches 193 cm
2WD Weight
2348 lbs 1065 kg
4WD Weight
2557 lbs 1159 kg
Ground clearance
11.8 inches 29 cm
2WD Front tread
38.6/42.5/46.5/50.4 inches 98/107/118/128 cm
4WD Front tread
42.1 inches 106 cm
Rear tread
40.2/43.3/44.9/48/52.8 inches 102/109/114/121/134 cm

Photos

Iseki TA250

Iseki TA250

Iseki TA250

Iseki TA250

Iseki TA250

Iseki TA250

Iseki TA250

Iseki TA250

Recommended Implements & Sizing Guide

Engineering recommendations for Iseki TA250 based on its 25 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
5 ft (60 in)1.5 mMedium DutyPasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep
54 to 60 in135 - 150 cmMedium DutyThorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TA250.

Estimated Continuous Field Runtime: 6.1 hrs

Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).

Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Iseki TA250 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TA250.

Converted Equivalents:

Horsepower (HP)25 hp
Kilowatts (kW)18.6 kW
Metric Horsepower (PS / CV)25.3 PS

Direct Competitor Comparison

Compare Iseki TA250 against same-era industry alternatives in the same horsepower class.

Current Model
Iseki

Iseki TA250

Engine Power:Diesel (listed): 25 hp / 18.6 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1523

Engine Power:22.5
Production Years:2005 - 2010
KubotaMarket Competitor

Kubota B9200

Engine Power:22.5
Production Years:1986 - 1990
ChallengerMarket Competitor

Challenger MT225B

Engine Power:22.5
Production Years:2005 - 2008
AGCOMarket Competitor

AGCO ST22A

Engine Power:22.5
Production Years:2003 - 2008