Iseki TL2500

The Iseki TL2500 is a tractor produced by Iseki. It is equipped with a 79.1 ci 1.3 L engine. The listed engine power is Diesel (listed): 25 hp / 18.6 kW. Transmission: 18 forward and 6 reverse. Operating weight: 2161 to 2359 pounds.

Engine Power
Diesel (listed): 25 hp / 18.6 kW
Fuel & Capacities
7.1 gal 26.9 L
Transmission
18 forward and 6 reverse
Operating Weight
2161 to 2359 pounds

Overview

Iseki TL2500 tractor photo
1980 - 1985 TL SeriesCompact Utility tractor TL Series Compact Utility tractor
Production
Manufacturer
Iseki
Compact Utility tractor
Variants
TL2500F
4WD
Iseki TL2500 Engine
Isuzu 1.3L 3-cyl diesel
Fuel tank
7.1 gal 26.9 L
Engine details ...
Iseki TL2500 Power
Engine
25 hp 18.6 kW
Mechanical
Two- or four-wheel drive
Open operator station.
Tractor hitch
Rear Type
JIS1
Power Take-off (PTO)
Rear PTO Type
540 (1.375)
Engine RPM
553@2600
731@2600
906@2600
1280@2600
Dimensions & Tires
Wheelbase
62.2 inches 157 cm
Weight
2161 to 2359 pounds
Front tire
5.00-15
2WD Rear tire
11.2-24
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
TL2500 references literature
TL published in 1984, by Iseki
TL1900 - TL2700
TL2500 published in 1984, by Iseki

Engine

Engine Detail — 79.1 ci / 1.3 L Diesel

Manufacturer
Isuzu E3AE1
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled
Displacement
79.1 ci 1.3 L
Bore/Stroke
3.15x3.386 inches 80 x 86 mm
Power
25 hp 18.6 kW
Rated RPM
2600
Starter
electric
Starter volts
12
Coolant capacity
7.4 qts 7.0 L
Oil capacity
5 qts 4.7 L
Oil change
100 h

Transmission

Transmission options
9-speed gear
18-speed creeper

Transmission — 9 forward and 3 reverse gear

Type
gear
Gears
9 forward and 3 reverse
Oil capacity
35.9 qts 34.0 L
Three gears (1-3) plus reverse (R) in three ranges.
TL2500  gear speeds

Transmission — 18 forward and 6 reverse creeper

Type
creeper
Gears
18 forward and 6 reverse
Three gears (1-3) plus reverse (R) in three ranges with additional creeper range.
TL2500  creeper speeds

Dimensions

Iseki TL2500 Tires
2WD Standard tires (ag)
Front: 5.00-15. Rear: 11.2-24
4WD Standard tires (ag)
Front: 7-16. Rear: 11.2-24
Dimensions
Wheelbase
62.2 inches 157 cm
Length
113 inches 287 cm
Width
52 inches 132 cm
Height
78 inches 198 cm
2WD Weight
2161 lbs 980 kg
4WD Weight
2359 lbs 1070 kg
Ground clearance
12.6 inches 32 cm
2WD Front tread
38.6 to 50.4 inches 98 to 128 cm
4WD Front tread
41.3 inches 104 cm
Rear tread
40.2 to 52.8 inches 102 to 134 cm

Photos

Iseki TL2500

Iseki TL2500

Recommended Implements & Sizing Guide

Engineering recommendations for Iseki TL2500 based on its 25 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
5 ft (60 in)1.5 mMedium DutyPasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep
54 to 60 in135 - 150 cmMedium DutyThorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TL2500.

Estimated Continuous Field Runtime: 5.5 hrs

Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (7.1 gal / 26.9 L).

Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Iseki TL2500 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TL2500.

Converted Equivalents:

Horsepower (HP)25 hp
Kilowatts (kW)18.6 kW
Metric Horsepower (PS / CV)25.3 PS

Direct Competitor Comparison

Compare Iseki TL2500 against same-era industry alternatives in the same horsepower class.

Current Model
Iseki

Iseki TL2500

Engine Power:Diesel (listed): 25 hp / 18.6 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1523

Engine Power:22.5
Production Years:2005 - 2010
KubotaMarket Competitor

Kubota B9200

Engine Power:22.5
Production Years:1986 - 1990
ChallengerMarket Competitor

Challenger MT225B

Engine Power:22.5
Production Years:2005 - 2008
AGCOMarket Competitor

AGCO ST22A

Engine Power:22.5
Production Years:2003 - 2008