Iseki TS2510
The Iseki TS2510 is a tractor produced by Iseki. It is equipped with a 72.25 ci 1.2 L engine. The listed engine power is Diesel (listed): 25 hp / 18.6 kW. Transmission: 9 forward and 3 reverse. Operating weight: 2601 lbs 1179 kg.
Engine Power
Diesel (listed): 25 hp / 18.6 kW
Fuel & Capacities
7.9 gal
29.9 L
Transmission
9 forward and 3 reverse
Operating Weight
2601 lbs
1179 kg
Overview
 | 1976 - 1980
TS SeriesCompact Utility tractor
TS Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TS2510F | 4WD |
Iseki TS2510 Engine | |
|---|---|
Isuzu 1.2L 2-cyl diesel | |
Fuel tank | 7.9 gal
29.9 L |
Engine details ...  | |
Iseki TS2510 Transmission | |
|---|---|
9-speed gear | |
Transmission details ...  |
Iseki TS2510 Power | |
|---|---|
Engine | 25 hp
18.6 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 630@2600 |
773@2600 | |
990@2600 | |
1547@2600 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 64.6 inches
164 cm |
Weight | 2601 lbs
1179 kg |
Front tire | 5.00-15 |
Rear tire | 11.2/10-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
TS & TX Series published in 1975, by Iseki | |
TS1610-TS2810 | |
TS3510-TS2810-TS2510 published in 1976, by Iseki |
Engine
Engine Detail — 72.25 ci / 1.2 L Diesel
Manufacturer | Isuzu 2AB1 |
Fuel Type | Diesel |
Configuration | 2-cylinder, liquid-cooled |
Displacement | 72.25 ci
1.2 L |
Bore/Stroke | 3.39x4.02 inches
86 x 102 mm |
Power | 25 hp
18.6 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 9 forward and 3 reverse gear
Type | gear |
Gears | 9 forward and 3 reverse |
Three gears (1-3) plus reverse (R) in three ranges. Additional creeper range available on four-wheel drive models. | |
 | |
Dimensions
Iseki TS2510 Tires | |
|---|---|
Standard tires (ag) | Front: 5.00-15. Rear: 11.2/10-24 |
Dimensions | |
|---|---|
Wheelbase | 64.6 inches
164 cm |
Length | 117.7 inches
298 cm |
Width | 56.7 inches
144 cm |
Height | 54.3 inches
137 cm |
Weight | 2601 lbs
1179 kg |
2WD Front tread | 42.5 to 58.3 inches
107 to 148 cm |
4WD Front tread | 44.1 inches
112 cm |
Rear tread | 44.9 to 56.3 inches
114 to 143 cm |
Photos
Iseki TS2510 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TS2510 based on its 25 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TS2510.
Estimated Continuous Field Runtime: 6.1 hrs
Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TS2510 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TS2510.
Converted Equivalents:
Horsepower (HP)25 hp
Kilowatts (kW)18.6 kW
Metric Horsepower (PS / CV)25.3 PS
Direct Competitor Comparison
Compare Iseki TS2510 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TS2510
Engine Power:Diesel (listed): 25 hp / 18.6 kW
★ Baseline Reference
Related models
Iseki TU320
- Power:
- 20
Iseki TF21F
- Power:
- 20.7
- Production years:
- 1995 - 2005
Iseki TL2101
- Power:
- 20.7
- Production years:
- 1980 - 1985
Iseki TPC213
- Power:
- 20.7
- Production years:
- 2019 - 2026
Iseki TU2100
- Power:
- 20.7
- Production years:
- 1981 - 1984