J.I. Case CF 250
The J.I. Case CF 250 is a tractor produced by J I Case. It is equipped with a 110.8 ci 1.8 L engine. The listed engine power is Diesel (listed): 25 hp / 18.6 kW. Transmission: 8 forward and 4 reverse. Operating weight: 3527 lbs 1599 kg.
Engine Power
Diesel (listed): 25 hp / 18.6 kW
Fuel & Capacities
13.2 gal
50.0 L
Transmission
8 forward and 4 reverse
Operating Weight
3527 lbs
1599 kg
Overview
 | 1962 - 1966
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | J.I. Case |
Utility tractor | |
Built in Vierzon, France | |
J.I. Case CF 250 Engine | |
|---|---|
Indenor 1.8L 4-cyl diesel | |
Engine details ...  |
J.I. Case CF 250 Transmission | |
|---|---|
8-speed gear | |
Transmission details ...  |
J.I. Case CF 250 Power | |
|---|---|
Engine | 25 hp
18.6 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Final drives | planetary |
Differential lock | mechanical rear |
Manual steering | |
Mechanical drum brakes | |
Open operator station. | |
Capacity | |
|---|---|
Fuel | 13.2 gal
50.0 L |
Hydraulic system | 2.25 gal
8.5 L |
Hydraulics | |
|---|---|
Capacity | 2.25 gal
8.5 L |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Mid PTO | independent |
Mid PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 68.9 inches
175 cm |
Weight | 3527 lbs
1599 kg |
Front tire | 5.00-15 |
Rear tire | 10-28 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
Notice d'utilisation CF250 et CF350 |
Engine
Engine Detail — 110.8 ci / 1.8 L Diesel
Manufacturer | Indenor XDP85 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 110.8 ci
1.8 L |
Bore/Stroke | 3.35x3.15 inches
85 x 80 mm |
Power | 25 hp
18.6 kW |
Fuel system | indirect injection |
Air cleaner | oil bath |
Compression | 21:1 |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 4.2 qts
4.0 L |
Coolant capacity | 10.8 qts
10.2 L |
Transmission
Transmission — 8 forward and 4 reverse gear
Type | gear |
Gears | 8 forward and 4 reverse |
Four gears in two ranges, plus reverse range. | |
With 10-28 rear tires. | |
 | |
Dimensions
J.I. Case CF 250 Tires | |
|---|---|
Ag front | 5.00-15 |
Ag rear | 10-28 |
Ag rear | 11-28 |
Dimensions | |
|---|---|
Wheelbase | 68.9 inches
175 cm |
Length | 117.7 inches
298 cm |
Width | 64.6 inches
164 cm |
Height | 62.6 inches
159 cm |
Weight | 3527 lbs
1599 kg |
Ground clearance | 18.9 inches
48 cm |
Front tread | 48 to 70.5 inches
121 to 179 cm |
Rear tread | 48 to 75.6 inches
121 to 192 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for J I Case J.I. Case CF 250 based on its 25 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for J I Case J.I. Case CF 250.
Estimated Continuous Field Runtime: 10.2 hrs
Approximately 10.2 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
J I Case J.I. Case CF 250 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for J I Case J.I. Case CF 250.
Converted Equivalents:
Horsepower (HP)25 hp
Kilowatts (kW)18.6 kW
Metric Horsepower (PS / CV)25.3 PS
Direct Competitor Comparison
Compare J.I. Case CF 250 against same-era industry alternatives in the same horsepower class.
Current Model
J I Case
J.I. Case CF 250
Engine Power:Diesel (listed): 25 hp / 18.6 kW
★ Baseline Reference
Related models
J.I. Case R
- Power:
- 20
- Production years:
- 1936 - 1940
J.I. Case 10-18
- Power:
- 20.1
- Production years:
- 1918 - 1920
J.I. Case 12-20
- Power:
- 22.2
- Production years:
- 1921 - 1924
J.I. Case S
- Power:
- 23.3
- Production years:
- 1941 - 1952
J.I. Case SC
- Power:
- 24.4
- Production years:
- 1941 - 1954