John Deere 100F
The John Deere 100F is a tractor produced by John Deere. It is equipped with a 181.2 ci 3.0 L engine. The listed engine power is Diesel (gross): 97 hp / 72.3 kW. Transmission: 8 forward and reverse. Operating weight: 5225 lbs 2370 kg.
Engine Power
Diesel (gross): 97 hp / 72.3 kW
Transmission
8 forward and reverse
Operating Weight
5225 lbs
2370 kg
Overview
 | 2009 - 2015
Milenio F SeriesOrchard/Vineyard tractorGoldini built
Milenio F Series
Orchard/Vineyard tractor
Goldini built |
|---|
Production | |
|---|---|
Distributor | John Deere |
Manufacturer | Goldini |
Orchard/Vineyard tractor | |
Built in Italy | |
John Deere 100F Engine | |
|---|---|
VM Motori 3.0L 4-cyl diesel | |
Engine details ...  |
John Deere 100F Power | |
|---|---|
Engine (gross) | 97 hp
72.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Disc brakes | |
Two-post mid-mount folding ROPS. |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 10.6 gpm
40.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Rear lift (at ends) | 5512 lbs
2500 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/540E |
Dimensions & Tires | |
|---|---|
Wheelbase | 77.2 inches
196 cm |
Weight | 5225 lbs
2370 kg |
Front tire | 380/70-24 |
Rear tire | 420/70-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
 | |
Serie Milenio published in 2010, by John Deere |
Engine
Engine Detail — 181.2 ci / 3.0 L Diesel
Manufacturer | VM Motori |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 181.2 ci
3.0 L |
Rated Power (gross) | 97 hp
72.3 kW |
Rated RPM | 2600 |
Torque | 245.6 lb-ft
333.0 Nm |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
16-speed | |
8-speed |
Transmission — 16 forward and 8 reverse
Gears | 16 forward and 8 reverse |
Transmission — 8 forward and reverse
Gears | 8 forward and reverse |
Dimensions
John Deere 100F Tires | |
|---|---|
Standard tires (ag) | Front: 380/70-24. Rear: 420/70-24 |
Dimensions | |
|---|---|
Wheelbase | 77.2 inches
196 cm |
Length | 146.7 inches
372 cm |
Height | 89 inches
226 cm |
Weight | 5225 lbs
2370 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 100F based on its 97 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 100F.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 100F Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 100F.
Converted Equivalents:
Horsepower (HP)97 hp
Kilowatts (kW)72.3 kW
Metric Horsepower (PS / CV)98.3 PS
Direct Competitor Comparison
Compare John Deere 100F against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 100F
Engine Power:Diesel (gross): 97 hp / 72.3 kW
★ Baseline Reference
Related models
John Deere 2640
- Power:
- 77.8
- Production years:
- 1976 - 1982
John Deere 3020
- Power:
- 77.8
- Production years:
- 1964 - 1972
John Deere 2400
- Power:
- 78
- Production years:
- 1993 - 1998
John Deere 2650
- Power:
- 78
- Production years:
- 1987 - 1994
John Deere 2630
- Power:
- 78.2
- Production years:
- 1974 - 1975