John Deere 2355
The John Deere 2355 is a tractor produced by John Deere. It is equipped with a 239 ci 3.9 L engine. The listed engine power is Diesel (listed): 64 hp / 47.7 kW. Transmission: John Deere Collar Shift Reverser. Operating weight: 5965 to 7552 pounds.
Engine Power
Diesel (listed): 64 hp / 47.7 kW
Fuel & Capacities
22.2 gal
84.0 L
Transmission
John Deere Collar Shift Reverser
Operating Weight
5965 to 7552 pounds
Overview
 | 1987 - 1992
55 Utility SeriesUtility tractor
55 Utility Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Utility tractor | |
Built in Mannheim, Baden-Württemberg, Germany | |
Original price was $21,000 in 1992 | |
Variants | |
|---|---|
2355N | narrow |
John Deere 2355 Engine | |
|---|---|
John Deere 3.9L 4-cyl diesel | |
Fuel tank | 22.2 gal
84.0 L |
Engine details ...  | |
John Deere 2355 Power | |
|---|---|
Engine | 64 hp
47.7 kW |
Drawbar (claimed) | 47 hp
35.0 kW |
PTO (claimed) | 55 hp
41.0 kW |
Drawbar (tested) | 46.7 hp
34.8 kW |
PTO (tested) | 55.9 hp
41.7 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Steering | power |
hydrostatic power OptOptional | |
Differential hydraulic wet disc brakes | |
Roll-Gard ROPS. Optional Sound-Gard cab. | |
Hydraulics | |
|---|---|
Type | closed center |
Pressure | 2250 psi
155.1 bar |
Valves | 1 to 3 |
Total flow | 13 gpm
49.2 lpm |
23 gpmOptOptional
87.1 lpm | |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Rear lift | 3269 lbs
1482 kg |
Front Hitch | II OptOptional |
Front lift | 3372 lbs
1529 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | live *Two-stage clutch |
independent OptOptional | |
Rear PTO Type | 540 |
540/1000 (TSS) | |
Dimensions & Tires | |
|---|---|
Wheelbase | 89.7 inches
227 cm |
Weight | 5965 to 7552 pounds |
Front tire | 6.50-16 |
Rear tire | 16.9-28 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 55 |
Batteries | 2 |
Battery CCA | 400 |
Battery volts | 12 |
References | |
|---|---|
 | |
Utility Equipment Purchasing Guide published in 1987, by John Deere | |
Utility Equipment Purchasing Guide published in 1988, by John Deere | |
Grounds Care & Recreation Products Sales Manual published in 1989, by John Deere | |
Powerful Pickups published in 1990, by John Deere | |
Tractors 40 to 85 HP published in 1986, by John Deere | |
Utility Tractors 53 to 64 HP published in 1987, by John Deere | |
Tractors 40 to 95 HP published in 1988, by John Deere | |
40 to 100 HP Tractors Product Information Handbook published in 1987, by John Deere | |
40 to 100 HP Tractors Product Information Handbook published in 1988, by John Deere | |
40 to 100 HP Tractors Product Information Handbook published in 1991, by John Deere | |
The 1991 Long Green Line Agricultural Equipment Review published by John Deere |
Engine
Engine Detail — 239 ci / 3.9 L Diesel
Manufacturer | John Deere |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 239 ci
3.9 L |
Bore/Stroke | 4.19x4.33 inches
106 x 110 mm |
Power | 64 hp
47.7 kW |
Compression | 17.8:1 |
Rated RPM | 2500 (CST) |
2300 (TSS) | |
Starter volts | 12 |
Oil capacity | 10.6 qts
10.0 L |
Coolant capacity | 13.7 qts
13.0 L |
Transmission
Transmission options | |
|---|---|
8-speed non-synchronized | |
8-speed partially synchronized | |
16-speed partial power shift | |
8-speed power shuttle |
Transmission — John Deere Collar Shift (CST)
Transmission | John Deere Collar Shift (CST) |
Type | non-synchronized |
Gears | 8 forward and 4 reverse |
Clutch | dry disc |
Four gears with two forward and one reverse range. | |
Transmission — John Deere Top-Shaft Synchronized (TSS)
Transmission | John Deere Top-Shaft Synchronized (TSS) |
Type | partially synchronized |
Gears | 8 forward and 4 reverse |
Clutch | dry disc |
Four gears (1-4) with two ranges (I-II) and reverse range. Optional creeper range provides 12 forward and 8 reverse speeds. | |
With 14.9-24 rear tires. | |
 | |
Transmission — John Deere Hi-Lo Top-Shaft Synchronized (TSS)
Transmission | John Deere Hi-Lo Top-Shaft Synchronized (TSS) |
Type | partial power shift |
Gears | 16 forward and 8 reverse |
Clutch | dry disc |
Adds a hydraulic high-low power shift to the basic TSS transmission. | |
Transmission — John Deere Collar Shift Reverser
Transmission | John Deere Collar Shift Reverser |
Type | power shuttle |
Gears | 8 forward and reverse |
Adds a hydraulic reverse to the CST transmission. | |
Dimensions
John Deere 2355 Tires | |
|---|---|
Ag front | 6.50-16 |
Ag rear | 16.9-28 |
Dimensions | |
|---|---|
Wheelbase | 89.7 inches
227 cm |
John Deere 2355 Weight | |
|---|---|
2WD ROPS Shipping | 5965 lbs
2705 kg |
2WD cab Shipping | 6945 lbs
3150 kg |
4WD ROPS Shipping | 6637 lbs
3010 kg |
4WD cab Shipping | 7552 lbs
3425 kg |
Tests
Nebraska Tractor Test 025 | |
|---|---|
Diesel 8-speed 2WD
August 1987 - 1987, | |
PTO performance | |
Power at rated engine speed | 55.9 hp
41.7 kW |
Fuel use | 3.4 gal/hour
12.9 l/hour |
Drawbar performance | |
Max power | 46.7 hp
34.8 kW |
Fuel use | 3.7 gal/hour
14.0 l/hour |
Attachments
Attachment overview | |
|---|---|
John Deere 520 loader | |
John Deere 540 loader | |
John Deere 540 MSL loader |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 2355 based on its 64 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 2355.
Estimated Continuous Field Runtime: 6.7 hrs
Approximately 6.7 hours of continuous field operation at ~75% rated power on a full tank (22.2 gal / 84 L).
Estimated 75% Load Fuel Burn~3.3 gal/hr (12.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 2355 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 2355.
Converted Equivalents:
Horsepower (HP)64 hp
Kilowatts (kW)47.7 kW
Metric Horsepower (PS / CV)64.9 PS
Direct Competitor Comparison
Compare John Deere 2355 against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 2355
Engine Power:Diesel (listed): 64 hp / 47.7 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 544
Engine Power:57.8
Production Years:1968 - 1973
Related models
John Deere 1520
- Power:
- 51.7
- Production years:
- 1968 - 1972
John Deere 2010
- Power:
- 51.9
- Production years:
- 1960 - 1965
John Deere 2330
- Power:
- 52.5
- Production years:
- 1975 - 1980
John Deere 2010C
- Power:
- 52.7
- Production years:
- 1960 - 1965
John Deere 1120
- Power:
- 53
- Production years:
- 1967 - 1975