John Deere 3110
The John Deere 3110 is a tractor produced by John Deere. It is equipped with a 179 ci 2.9 L engine. The listed engine power is Engine Detail — 179 ci / 2.9 L (net): 55 hp / 41.0 kW. Transmission: Twinshift. Operating weight: 6860 lbs 3111 kg.
Engine Power
Engine Detail — 179 ci / 2.9 L (net): 55 hp / 41.0 kW
Fuel & Capacities
30.4 gal
115.1 L
Transmission
Twinshift
Operating Weight
6860 lbs
3111 kg
Overview
 | 1998 - 2002
Utility tractorRenault built
Utility tractor
Renault built |
|---|
Production | |
|---|---|
Distributor | John Deere |
Manufacturer | Renault |
Utility tractor | |
Built in Le Mans, France | |
John Deere 3110 Engine | |
|---|---|
John Deere 2.9L 3-cyl | |
Fuel tank | 30.4 gal
115.1 L |
Engine details ...  | |
John Deere 3110 Power | |
|---|---|
Engine (net) | 55 hp
41.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Wet disc brakes | |
Cab standard with heat. | |
Hydraulics | |
|---|---|
Pump flow | 13.7 gpm
51.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 6195 lbs
2810 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 88.2 inches
224 cm |
Weight | 6860 lbs
3111 kg |
Front tire | 11.2R28 |
Rear tire | 13.6R36 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 179 ci / 2.9 L
Manufacturer | John Deere |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 179 ci
2.9 L |
Bore/Stroke | 4.19x4.33 inches
106 x 110 mm |
Rated Power (net) | 55 hp
41.0 kW |
Rated RPM | 2280 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
20-speed synchronized | |
20-speed power shift |
Transmission — 20 forward and reverse synchronized
Type | synchronized |
Gears | 20 forward and reverse |
Transmission — Twinshift
Transmission | Twinshift |
Type | power shift |
Gears | 20 forward and reverse |
Dimensions
John Deere 3110 Tires | |
|---|---|
Standard tires (ag) | Front: 11.2R28. Rear: 13.6R36 |
Dimensions | |
|---|---|
Wheelbase | 88.2 inches
224 cm |
Length | 147 inches
373 cm |
Height (cab) | 96.5 inches
245 cm |
Weight | 6860 lbs
3111 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 3110 based on its 55 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 3110.
Estimated Continuous Field Runtime: 10.6 hrs
Approximately 10.6 hours of continuous field operation at ~75% rated power on a full tank (30.4 gal / 115.1 L).
Estimated 75% Load Fuel Burn~2.9 gal/hr (10.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 3110 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 3110.
Converted Equivalents:
Horsepower (HP)55 hp
Kilowatts (kW)41 kW
Metric Horsepower (PS / CV)55.8 PS
Direct Competitor Comparison
Compare John Deere 3110 against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 3110
Engine Power:Engine Detail — 179 ci / 2.9 L (net): 55 hp / 41.0 kW
★ Baseline Reference
Related models
John Deere 1020 VU
- Power:
- 44
- Production years:
- 1967 - 1972
John Deere 1250
- Power:
- 44
- Production years:
- 1982 - 1989
John Deere 3720
- Power:
- 44
- Production years:
- 2005 - 2013
John Deere 515
- Power:
- 44.1
- Production years:
- 1966 - 1976
John Deere 2535
- Power:
- 44.3
- Production years:
- 1975 - 1983