John Deere 3550

The John Deere 3550 is a tractor produced by John Deere. It is equipped with a 359 ci 5.9 L engine. The listed engine power is Diesel (listed): 125 hp / 93.2 kW. Transmission: 16 forward and 4 reverse. Operating weight: 14350 lbs 6509 kg.

Engine Power
Diesel (listed): 125 hp / 93.2 kW
Fuel & Capacities
33 gal 124.9 L
Transmission
16 forward and 4 reverse
Operating Weight
14350 lbs 6509 kg

Overview

John Deere 3550 tractor photo
1988 - 1993 Utility tractor
Production
Manufacturer
John Deere
Utility tractor
Built in Rosario, Argentina
John Deere 3550 Engine
John Deere 5.9L 6-cyl diesel
Fuel tank
33 gal 124.9 L
13.5 gal (aux tank) 51.1 L
Engine details ...
John Deere 3550 Transmission
16-speed synchromesh
Transmission details ...
John Deere 3550 Power
Engine
125 hp 93.2 kW
Mechanical
Four-wheel drive
Power steering
Hydraulic wet disc brakes
Open operator station.
Hydraulics
Pump flow
11.6 gpm 43.9 lpm
Tractor hitch
Rear Type
II
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540
540/1000
Dimensions & Tires
2WD Wheelbase
100.4 inches 255 cm
4WD Wheelbase
101.6 inches 258 cm
Weight
14350 lbs 6509 kg
Front tire
16.9x24
Rear tire
18.4x38
Full dimensions and tires ...
Electrical
Charging system
alternator
Charging amps
28
Charging volts
12
Battery volts
12
Battery AH
100

Engine

Engine Detail — 359 ci / 5.9 L Diesel

Manufacturer
John Deere
Configuration
turbocharged diesel, 6-cylinder, liquid-cooled
Displacement
359 ci 5.9 L
Bore/Stroke
4.193x4.331 inches 107 x 110 mm
Power
125 hp 93.2 kW
Fuel system
direct injection
Compression
17.4:1
Rated RPM
2300
Torque
70.8 lb-ft 96.0 Nm
Torque RPM
1500
Starter
electric
Starter volts
12
Oil capacity
12.2 qts 11.5 L
Coolant capacity
20 qts 18.9 L

Transmission

Transmission — 16 forward and 4 reverse synchromesh

Type
synchromesh
Gears
16 forward and 4 reverse
Clutch
dry disc
With 18.4x38 rear tires.
3550  synchromesh speeds

Dimensions

John Deere 3550 Tires
Ag front
16.9x24
Ag rear
18.4x38
Dimensions
2WD Wheelbase
100.4 inches 255 cm
4WD Wheelbase
101.6 inches 258 cm
Length
184 inches 467 cm
Width
85 inches 215 cm
Height
113.4 inches 288 cm
Weight
14350 lbs 6509 kg
Ground clearance
13.4 inches 34 cm
Front tread
61.4 to 78 inches 155 to 198 cm
Rear tread
56.3 to 87 inches 143 to 220 cm

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 3550 based on its 125 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙Commercial / Field ScaleWide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 3550.

Estimated Continuous Field Runtime: 5.1 hrs

Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (33 gal / 124.9 L).

Estimated 75% Load Fuel Burn~6.5 gal/hr (24.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

John Deere 3550 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 3550.

Converted Equivalents:

Horsepower (HP)125 hp
Kilowatts (kW)93.2 kW
Metric Horsepower (PS / CV)126.7 PS

Direct Competitor Comparison

Compare John Deere 3550 against same-era industry alternatives in the same horsepower class.

Current Model
John Deere

John Deere 3550

Engine Power:Diesel (listed): 125 hp / 93.2 kW
★ Baseline Reference
FendtMarket Competitor

Fendt 411 Vario

Engine Power:112.7
Production Years:2006 - 2012
Deutz-FahrMarket Competitor

Deutz-Fahr 6.17

Engine Power:113
Production Years:1991 - 1995
KubotaMarket Competitor

Kubota M5111

Engine Power:113
Production Years:2016 - 2020
CaseIHMarket Competitor

CaseIH CS 120

Engine Power:113.4
Production Years:1997 - 2003