John Deere 4075R

The John Deere 4075R is a tractor produced by John Deere. It is equipped with a 127.5 ci 2.1 L engine. The listed engine power is Diesel (gross): 74.3 hp / 55.4 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 4828 lbs 2189 kg.

Engine Power
Diesel (gross): 74.3 hp / 55.4 kW
Fuel & Capacities
14.7 gal 55.6 L
Transmission
infinite forward and reverse (3-range)
Operating Weight
4828 lbs 2189 kg

Overview

John Deere 4075R tractor photo
2024 - 4R SeriesCompact Utility tractor
2024 -
4R Series
Compact Utility tractor
Production
Manufacturer
John Deere
Compact Utility tractor
Built in Augusta, Georgia, USA
Original price was $68,049 in 2024
John Deere 4075R Engine
Yanmar 2.1L 4-cyl diesel
Fuel tank
14.7 gal 55.6 L
Engine details ...
John Deere 4075R Transmission
hydrostatic
Transmission details ...
John Deere 4075R Power
Engine (gross)
74.3 hp 55.4 kW
PTO (claimed)
60 hp 44.7 kW
Mechanical
Four-wheel drive
Final drives
planetary
Differential lock
mechanical rear
Power steering
Wet disc brakes
Cab standard with air-conditioning.
Hydraulics
Type
open center
Valves
3 to 5
Total flow
15.9 gpm 60.2 lpm
Tractor hitch
Rear Type
II/I
Control
position control
Rear lift (at ends)
3130 lbs 1419 kg
Rear lift (at 24"/610mm)
2500 lbs 1134 kg
Power Take-off (PTO)
Rear PTO
independent
Clutch
wet disc
Rear PTO Type
540 (1.375)
Engine RPM
540@2600
540E@1750
Dimensions & Tires
Wheelbase
73 inches 185 cm
Weight
4828 lbs 2189 kg
Front tire
8-16
Rear tire
13.6-28
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
75
Battery CCA
770
Battery volts
12
References
4075R references literature
4 Series published in 2023, by John Deere
Operator's Manual 4 Series (OMTR130411) published in 2023*
*Publication contains known errors.

Engine

Engine Detail — 127.5 ci / 2.1 L Diesel

Manufacturer
Yanmar 4TNV86
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled inline
Displacement
127.5 ci 2.1 L
Bore/Stroke
3.39x3.54 inches 86 x 90 mm
Emissions
Tier IV
Emission control
diesel particulate filter (DPF)
Rated Power (gross)
74.3 hp 55.4 kW
Fuel system
high-pressure common rail
Air cleaner
dry
Compression
17.3:1
Rated RPM
2600
Idle RPM
900-2750
Torque
194.7 lb-ft 264.0 Nm
Torque RPM
1690
Starter
electric
Starter volts
12
Oil capacity
5.7 qts 5.4 L
Coolant capacity
8 qts 7.6 L

Transmission

Transmission — infinite forward and reverse (3-range) hydrostatic

Type
hydrostatic
Gears
infinite forward and reverse (3-range)
4075R  hydrostatic speeds

Dimensions

John Deere 4075R Tires
Standard tires (ag)
Front: 8-16. Rear: 13.6-28
Dimensions
Wheelbase
73 inches 185 cm
Length
133.4 inches 338 cm
Width
78.3 inches 198 cm
Height (cab)
97.4 inches 247 cm
John Deere 4075R Weight
4828 lbs 2189 kg
Max front axle
3307 lbs 1500 kg
Max rear axle
5512 lbs 2500 kg

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 4075R based on its 74.3 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 4075R.

Estimated Continuous Field Runtime: 3.8 hrs

Approximately 3.8 hours of continuous field operation at ~75% rated power on a full tank (14.7 gal / 55.6 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

John Deere 4075R Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 4075R.

Converted Equivalents:

Horsepower (HP)74.3 hp
Kilowatts (kW)55.4 kW
Metric Horsepower (PS / CV)75.3 PS

Direct Competitor Comparison

Compare John Deere 4075R against same-era industry alternatives in the same horsepower class.

Current Model
John Deere

John Deere 4075R

Engine Power:Diesel (gross): 74.3 hp / 55.4 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 3306

Engine Power:67
Production Years:2021 - 2026
International HarvesterMarket Competitor

International Harvester 574

Engine Power:67
Production Years:1970 - 1978
CaseIHMarket Competitor

CaseIH 743 XL

Engine Power:67
Production Years:1985 - 1989
Deutz-FahrMarket Competitor

Deutz-Fahr D 6807

Engine Power:67
Production Years:1980 - 1982