John Deere 4210
The John Deere 4210 is a tractor produced by John Deere. It is equipped with a 81.2 ci 1.3 L engine. The listed engine power is Diesel (gross): 27 hp / 20.1 kW; Diesel (listed): 1.6 hp / 1.2 kW. Transmission: eHydro. Operating weight: 1047 lbs 474 kg.
Engine Power
Diesel (gross): 27 hp / 20.1 kW; Diesel (listed): 1.6 hp / 1.2 kW
Fuel & Capacities
10 gal
37.9 L
Transmission
eHydro
Operating Weight
1047 lbs
474 kg
Overview
 | 2002 - 2004
4000 Ten Compact SeriesCompact Utility tractor
4000 Ten Compact Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Compact Utility tractor | |
Built in Augusta, Georgia, USA | |
John Deere 4210 Engine | |
|---|---|
Yanmar 1.3L 3-cyl diesel | |
Engine details ...  |
John Deere 4210 Power | |
|---|---|
Engine (gross) | 27 hp
20.1 kW |
PTO (claimed) | 23.5 hp (gear)
17.5 kW |
22 hp (hydro)
16.4 kW | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | spur gear |
Differential lock | mechanical rear |
Steering | power |
Wet disc brakes | |
Two-post fixed ROPS. Two-post folding ROPS optional. | |
Capacity | |
|---|---|
Fuel | 10 gal
37.9 L |
Hydraulic system | 6.3 gal (gear)
23.8 L |
6.8 gal (hydro)
25.7 L | |
Front axle | 4.7 qts
4.4 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 6.3 gal (gear)
23.8 L |
6.8 gal (hydro)
25.7 L | |
Pressure | 2125 psi
146.5 bar |
Valves | 5 |
Pump flow | 7.0 gpm
26.5 lpm |
Total flow | 12.3 gpm
46.6 lpm |
Steering flow | 5.3 gpm
20.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift (at 24"/610mm) | 1,700 lbs
771 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | wet disc |
Rear PTO Type | 540 (1.375) |
Engine RPM | 540@2600 |
Mid PTO | independent OptOptional |
Mid PTO Type | 2100 |
Dimensions & Tires | |
|---|---|
Wheelbase | 65 inches
165 cm |
Weight | 2375 to 2675 pounds |
Front tire | 4.00-15 |
Rear tire | 11.2-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 40 |
55 OptOptional | |
Battery CCA | 500 |
Battery volts | 12 |
References | |
|---|---|
 | |
Operator's Manual 410 and 420 Loaders (OMC49370) published in 2005 | |
4000 TEN Series 18 To 48 HP published in 2001, by John Deere | |
4000 TEN Series - The tractor redefined published in 2001, by John Deere | |
4000 TEN Series - Take Command published in 2001, by John Deere | |
4000 TEN Series Product Information Handbook published in 2003, by John Deere | |
Commercial & Consumer Equipment Purchase Guide published in 2005, by John Deere |
Engine
Engine Detail — 81.2 ci / 1.3 L Diesel
Manufacturer | Yanmar 3TNE82A |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 81.2 ci
1.3 L |
Bore/Stroke | 3.23x3.31 inches
82 x 84 mm |
Power (gross) | 27 hp
20.1 kW |
Air cleaner | dry |
Compression | 18.5:1 |
Rated RPM | 2600 |
Idle RPM | 1000-2810 |
Starter volts | 12 |
Starter power | 1.6 hp
1.2 kW |
Oil capacity | 4.0 qts
3.8 L |
Coolant capacity | 5.6 qts
5.3 L |
Transmission
Transmission options | |
|---|---|
9-speed partially synchronized | |
hydrostatic |
Transmission — SyncShift
Transmission | SyncShift |
Type | partially synchronized |
Gears | 9 forward and 3 reverse |
Oil capacity | 25.2 qts
23.8 L |
Three gears (1-3) plus reverse in three ranges (A-C). Gears can be shifted on the move using the clutch. Tractor must be stopped to shift ranges. | |
With 12.4-16 rear tires. | |
 | |
Transmission — eHydro
Transmission | eHydro |
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
Oil capacity | 27.2 qts
25.7 L |
Three-range hydrostatic transmission with foot pedals and cruise control. Tractor must be stopped to shift ranges. Automotive cruise control option allows set speed to be adjusted with rocker switch. SpeedMatch option allows a maximum speed to be set and full pedal travel used to achive that speed. LoadMatch option prevents the tractor from stalling during heavy loads. The MotionMatch option enables the acceleration rate to be set to fast or slow. | |
With 12.4-16 rear tires. | |
 | |
Dimensions
John Deere 4210 Tires | |
|---|---|
Ag front | 4.00-15 (2WD) |
7.00-14 (4WD) | |
Ag rear | 11.2-24 |
Dimensions | |
|---|---|
Wheelbase | 65 inches
165 cm |
Length | 117 inches
297 cm |
Width | 53 inches
134 cm |
Clearance (rear axle) | 30.1 inches
76 cm |
John Deere 4210 Weight | |
|---|---|
2375 lbs (2WD)
1077 kg | |
2675 lbs (4WD)
1213 kg | |
Max Drawbar | 562 lbs
254 kg |
Max front axle | 1588 lbs
720 kg |
Max rear axle | 4410 lbs
2000 kg |
John Deere 4210 Height | |
|---|---|
Hood | 50.4 inches
128 cm |
ROPS | 79.5 inches (fixed)
201 cm |
87.1 inches (folding)
221 cm | |
Attachments
Attachment overview | |
|---|---|
60" mid-mount mower deck | |
Snowblower | |
Front-end loader | |
Backhoe |
60" Mower deck | |
|---|---|
Type | mid-mount John Deere 60 7-Iron |
3-blade with hydraulic lift | |
Cutting width | 60 inches
152 cm |
Weight | 325 lbs
147 kg |
Overall width | 73.5 inches
186 cm |
Cut height | 1 to 5 inch
2 to 12 cm |
John Deere 47 Backhoe | |
|---|---|
Backhoe type | John Deere 47 Backhoe |
Weight | 1047 lbs
474 kg |
2-Foot flat digging depth | 90 inches
228 cm |
Reach from pivot | 114 inches
289 cm |
Loading height | 70 inches
177 cm |
Bucket Rotation | 180° |
Swing Arc | 180° |
Bucket force | 2840 lbs
1288 kg |
Dipperstick force | 2005 lbs
909 kg |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 4210.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 4210 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 4210.
Converted Equivalents:
Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS
Direct Competitor Comparison
Compare John Deere 4210 against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 4210
Engine Power:Diesel (gross): 27 hp / 20.1 kW; Diesel (listed): 1.6 hp / 1.2 kW
★ Baseline Reference
General OrdnanceMarket Competitor
General Ordnance 12-22
Engine Power:24.4
Production Years:1918 - 1918
Related models
John Deere M
- Power:
- 22.2
- Production years:
- 1947 - 1952
John Deere 2210
- Power:
- 23
- Production years:
- 2003 - 2006
John Deere 770
- Power:
- 23
- Production years:
- 1989 - 1998
John Deere 1023E
- Power:
- 23.5
- Production years:
- 2011 - 2026
John Deere 40
- Power:
- 23.5
- Production years:
- 1953 - 1955