John Deere 5075E
The John Deere 5075E is a tractor produced by John Deere. It is equipped with a 179 ci 2.9 L engine. The listed engine power is Diesel (gross): 75 hp / 55.9 kW. Transmission: SyncShuttle. Operating weight: 4634 to 5475 pounds.
Overview
![]() | 2008 - 2025
Model year 2008-20122013-20142015-20222023-2025
5E SeriesUtility tractor
5E Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Utility tractor | |
Built in Pune, Maharashtra, India | |
John Deere 5075E Engine | |
|---|---|
John Deere 2.9L 3-cyl diesel | |
Engine details ... |
John Deere 5075E Power | |
|---|---|
Engine (gross) | 75 hp
55.9 kW |
PTO (claimed) | 61 hp
45.5 kW |
PTO (tested) | 64.42 hp
48.0 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | planetary |
Differential lock | rear diff lock standard |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
Folding 2-post ROPS. Optional canopy. Optional deluxe canopy with lights and insulation. | |
Capacity | |
|---|---|
Fuel | 18 gal
68.1 L |
2WD Hydraulic system | 10 gal
37.9 L |
4WD Hydraulic system | 10.3 gal
39.0 L |
Front axle | 4.8 qts
4.5 L |
Front hubs | 0.85 qts*Each hub
0.8 L |
Hydraulics | |
|---|---|
Type | open center |
2WD Capacity | 10 gal
37.9 L |
4WD Capacity | 10.3 gal
39.0 L |
Pressure | 2828 psi
195.0 bar |
Rear valves | 1 or 2 |
Mid valves | 2 (optional) |
Pump flow | 11.4 gpm
43.1 lpm |
Total flow | 18.2 gpm
68.9 lpm |
Steering flow | 6.8 gpm
25.7 lpm |
Steering press. | 1958 psi
135.0 bar |
Tractor hitch | |
|---|---|
Rear Type | 2 |
Control | position and top-link draft control |
Rear lift (at 24"/610mm) | 3,192 lbs
1447 kg |
Drawbar | adjustable drawbar |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | mechanical |
Rear PTO Type | 540 |
Engine RPM | 540@2400 |
Dimensions & Tires | |
|---|---|
Wheelbase | 80.7 inches
204 cm |
Weight | 4634 to 5475 pounds |
Front tire | 7.50-16 |
Rear tire | 16.9-28 (2WD) |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | altenrator |
Charging amps | 40 |
Battery CCA | 623 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
New 5 Series Utility Tractors published in 2009, by John Deere | |
5 Series published in 2009, by John Deere | |
5D - 5E - 5E Limited Tractors published in 2012, by John Deere |
Engine
Engine Detail — 179 ci / 2.9 L Diesel
Manufacturer | John Deere PowerTech 3029H |
Configuration | turbocharged diesel, 3-cylinder, liquid-cooled |
Displacement | 179 ci
2.9 L |
Bore/Stroke | 4.19x4.33 inches
106 x 110 mm |
Rated Power (gross) | 75 hp
55.9 kW |
Air cleaner | two paper elements |
Pre-heating | coolant heater (optional) |
heavy-duty air pre-heater (optional) | |
Compression | 17.8:1 |
Rated RPM | 2400 |
Idle RPM | 800-2600 |
Operating RPM | 1800-2400 |
Torque | 195.5 lb-ft
265.1 Nm |
Torque RPM | 1700 |
Firing order | 1-2-3 |
Starter volts | 12 |
Coolant capacity | 10 qts
9.5 L |
Intake valve clearance | 0.014 inches
0.356 mm |
Exhaust valve clearance | 0.018 inches
0.457 mm |
Oil capacity | 9 qts
8.5 L |
Oil change | 100 h |
Transmission
Transmission options | |
|---|---|
9-speed | |
9-speed partially synchronized |
Transmission — SyncReverser
Transmission | SyncReverser |
Gears | 9 forward and 3 reverse |
Clutch | dry disc |
Oil capacity | 40.15 qts
38.0 L |
Oil type | JD Hy-Gard |
Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shuttle shift between 2 and R in all ranges. Other shifts are not synchronized. The SyncReverser is standard equipment on two-wheel drive models. | |
With 16.9-28 rear tires. | |
![]() | |
JD Hy-Gard |
|---|
Transmission — SyncShuttle
Transmission | SyncShuttle |
Type | partially synchronized |
Gears | 9 forward and 3 reverse |
Clutch | dry disc |
Oil capacity | 41.2 qts
39.0 L |
Oil type | JD Hy-Gard |
Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shuttle shift between 2 and R in all ranges. Forward gear shifts in-range are synchronized. Shifts between ranges are not synchronized. The SyncShuttle is standard equipment on four-wheel drive models. | |
With 16.9-28 rear tires. | |
![]() | |
JD Hy-Gard |
|---|
Dimensions
John Deere 5075E Tires | |
|---|---|
Standard tires (ag) | Front: 7.50-16. Rear: 16.9-28 (2WD) |
Front: 9.5-24. Rear: 16.9-28 (4WD) | |
Lawn/turf front | 27/12LL-15 (2WD) |
9.5-16 (4WD) | |
Lawn/turf rear | 21.5L-16.1 |
Industrial front | 11L-15 (2WD) |
12.5/80-18 (4WD) | |
Industrial rear | 16.9-24 |
Dimensions | |
|---|---|
Wheelbase | 80.7 inches
204 cm |
Length | 137.8 inches
350 cm |
Width | 57.3 inches (axle flange)
145 cm |
2WD Clearance (front axle) | 18.8 inches
47 cm |
4WD Clearance (front axle) | 13.4 inches
34 cm |
Front axle | Flange axle: 64.6 inch length
1640 mm |
Flange axle rear axle | 57.5 inch length
1460 mm |
Front tread | 56 to 80 inches
142 to 203 cm |
Rear tread | 55.8 to 71.7 inches
141 to 182 cm |
John Deere 5075E Weight | |
|---|---|
2WD Shipping | 4,634 lbs
2101 kg |
4WD Shipping | 5,070 lbs
2299 kg |
4WD Operating | 5,475 lbs
2483 kg |
John Deere 5075E Height | |
|---|---|
Hood | 53.8 inches
136 cm |
ROPS | 96.8 inches
245 cm |
78.5 inches (folded)
199 cm | |
Tests
Nebraska Tractor Test 1957 | |
|---|---|
Diesel 9-speed 4WD
October 1 - 8, 2009
Link: Nebraska Tractor Test 1957 file | |
PTO performance | |
Max power | 64.42 hp
48.0 kW |
Fuel use | 4.0 gal/hour
15.1 l/hour |
Power at rated engine speed | 62.16 hp
46.4 kW |
Fuel use | 4.1 gal/hour
15.5 l/hour |
Power at rated PTO speed | 62.81 hp
46.8 kW |
Fuel use | 4.1 gal/hour
15.5 l/hour |
Attachments
Attachment overview | |
|---|---|
John Deere 512 loader | |
John Deere 553 loader |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 5075E based on its 75 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 5075E.
Estimated Continuous Field Runtime: 4.6 hrs
Approximately 4.6 hours of continuous field operation at ~75% rated power on a full tank (18 gal / 68.1 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
John Deere 5075E Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 5075E.
Converted Equivalents:
Direct Competitor Comparison
Compare John Deere 5075E against same-era industry alternatives in the same horsepower class.
John Deere 5075E
Related models
John Deere 5060E
- Power:
- 60.4
- Production years:
- 2023 - 2026
John Deere 2350
- Power:
- 61.1
- Production years:
- 1983 - 1986
John Deere 1641
- Power:
- 61.7
- Production years:
- 1982 - 1987
John Deere 1950
- Power:
- 61.7
- Production years:
- 1988 - 1994
John Deere 2251
- Power:
- 61.7
- Production years:
- 1987 - 1993



