John Deere 5075GN

The John Deere 5075GN is a tractor produced by John Deere. It is equipped with a 206.9 ci 3.4 L engine. The listed engine power is Diesel (gross): 75 hp / 55.9 kW. Transmission: SyncReverser. Operating weight: 5566 to 6558 pounds.

Engine Power

Diesel (gross): 75 hp / 55.9 kW

Fuel & Capacities

22.7 gal 85.9 L

Transmission

SyncReverser

Operating Weight

5566 to 6558 pounds

Overview

	2016 - 5G SeriesOrchard/Vineyard tractor
2016 -
5G Series
Orchard/Vineyard tractor

Production
Manufacturer	John Deere
Orchard/Vineyard tractor

Variants
5075GN	narrow
5075GV	vineyard

John Deere 5075GN Engine
FPT 3.4L 4-cyl diesel
Fuel tank	22.7 gal 85.9 L
	30.2 gal*With optional auxiliary tank 114.3 L
Engine details ...

John Deere 5075GN Power
Engine (gross)	75 hp 55.9 kW

Mechanical
Two- or four-wheel drive
Final drives	inboard planetary
Differential lock	electrohydraulic
Power steering
Hydraulic wet disc brakes
Two-post foldable mid-mount ROPS. Cab optional with air-conditioning.

Hydraulics
Type	open center
Rear valves	0 to 4
Mid valves	0 to 4
Pump flow	17.6 gpm 66.6 lpm
	7.9 gpm*Optional, third pump. 29.9 lpm
Total flow	25.5 gpm 96.5 lpm
	33.4 gpm*With third pump 126.4 lpm
Steering flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	II
Control	center link draft sensing
Rear lift (at ends)	5710 lbs 2590 kg
	6834 lbsOptOptional 3099 kg
Rear Arms	fixed ball ends
	adjustable ball ends OptOptional

Power Take-off (PTO)
Rear PTO	independent
Clutch	mechanical dry disc
	hydraulic wet disc *With PowrReverser transmission.
Rear PTO Type	540/540E

Dimensions & Tires
Weight	5566 to 6558 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 206.9 ci / 3.4 L Diesel

Manufacturer	FPT
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	206.9 ci 3.4 L
Bore/Stroke	3.9x4.33 inches 99 x 110 mm
Emissions	Tier IV
Rated Power (gross)	75 hp 55.9 kW
Cooling system	viscous fan
Starter	electric
Starter volts	12

Transmission

Transmission options
24-speed
12-speed

Transmission — PowrReverser

Transmission	PowrReverser
Gears	24 forward and 12 reverse
Clutch	wet disc
Four gears (1-4) in three ranges (A-C) with push-button high-low shift and power shuttle.

Transmission — SyncReverser

Transmission	SyncReverser
Gears	12 forward and reverse
Clutch	dry disc
Four gears (1-4) in three ranges (A-C) with synchronized shuttle.

Dimensions

John Deere 5075GN Tires

Dimensions
Width	49.5 inches 125 cm
Flange rear axle	38.3 inch length 972 mm

John Deere 5075GN Weight
2WD ROPS	5566 lbs 2524 kg
4WD ROPS	5864 lbs 2659 kg
2WD Cab	6272 lbs 2844 kg
4WD Cab	6558 lbs 2974 kg

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 5075GN based on its 75 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 5075GN.

Estimated Continuous Field Runtime: 5.8 hrs

Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (22.7 gal / 85.9 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours