John Deere 5076EF

The John Deere 5076EF is a tractor produced by John Deere. It is equipped with a 274.6 ci 4.5 L engine. The listed engine power is Diesel (listed): 77 hp / 57.4 kW. Transmission: 9 forward and 3 reverse. Operating weight: 4982 to 5291 pounds.

Engine Power

Diesel (listed): 77 hp / 57.4 kW

Fuel & Capacities

15.85 gal 60.0 L

Transmission

9 forward and 3 reverse

Operating Weight

4982 to 5291 pounds

Overview

	Orchard/Vineyard tractor	Orchard/Vineyard tractor

Production
Manufacturer	John Deere
Orchard/Vineyard tractor

John Deere 5076EF Engine
John Deere 4.5L 4-cyl diesel
Engine details ...

John Deere 5076EF Transmission
9-speed
Transmission details ...

John Deere 5076EF Power
Engine	77 hp 57.4 kW
PTO (claimed)	66 hp 49.2 kW

Mechanical
Two- or four-wheel drive
Final drives	internal planetary
Power steering
Hydraulic wet disc brakes
Two-post mid-mount ROPS.

Capacity
Fuel	15.85 gal 60.0 L
Hydraulic system	11 gal 41.6 L

Hydraulics
Type	open center
Capacity	11 gal 41.6 L
Pressure	2700 psi 186.2 bar
Pump flow	22.5 gpm 85.2 lpm
SCV flow	15.9 gpm 60.2 lpm
Steering flow	6.6 gpm 25.0 lpm

Tractor hitch
Rear Type	II/I
Rear lift (at 24"/610mm)	3373 lbs 1529 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540
Engine RPM	540@2400

Dimensions & Tires
Wheelbase	81.5 inches 207 cm
Weight	4982 to 5291 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	70
Battery volts	12

Engine

Engine Detail — 274.6 ci / 4.5 L Diesel

Manufacturer	John Deere PowerTech 4045D
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	274.6 ci 4.5 L
Bore/Stroke	4.19x5.00 inches 106 x 127 mm
Power	77 hp 57.4 kW
Fuel system	direct injection
Compression	17.6:1
Rated RPM	2400
Torque	215.4 lb-ft 292.1 Nm
Torque RPM	1200
Starter	electric
Starter volts	12
Oil capacity	9 qts 8.5 L
Coolant capacity	11.4 qts 10.8 L

Transmission

Transmission — 9 forward and 3 reverse

Gears	9 forward and 3 reverse
Clutch	280mm dry disc
Oil capacity	44.2 qts 41.8 L

Dimensions

John Deere 5076EF Tires

Dimensions
Wheelbase	81.5 inches 207 cm
Length	149.2 inches 378 cm
Width	55.1 inches 139 cm
Height (steering wheel)	61.8 inches 156 cm
Height (ROPS)	100.4 inches 255 cm
2WD Weight	4982 lbs 2259 kg
4WD Weight	5291 lbs 2399 kg

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 5076EF based on its 77 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 5076EF.

Estimated Continuous Field Runtime: 3.9 hrs

Approximately 3.9 hours of continuous field operation at ~75% rated power on a full tank (15.8 gal / 60 L).

Estimated 75% Load Fuel Burn~4 gal/hr (15.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours